| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| For those who have installed lift pumps... http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=26658 |
Page 1 of 1 |
| Author: | greiswig [ Sat Nov 17, 2007 8:25 pm ] |
| Post subject: | For those who have installed lift pumps... |
I'm getting ready to plumb mine. There are two hard fuel lines that run along the driver's side "frame rail," one larger than the other. I gather that the smaller of the two is the return line to the tank? Also, how have you all tapped a line to put the fuel pump and prefilter in place? It almost looks like the easiest thing to do would be to cut a length of the hard line out, flare the open ends slightly, and put soft line over it with hose clamps. Anyone else have a more elegant solution (other than using a Dodge in-tank pump)? Thanks! |
|
| Author: | Stan Wright [ Sun Nov 18, 2007 2:21 am ] |
| Post subject: | |
Here's what I did: http://liberty.eurekaboy.com/kennedy.htm As you mentioned, the larger of the two lines is the line you'll need. I can't flare tubing to save my life so I just double clamped the hose. |
|
| Author: | greiswig [ Sun Nov 18, 2007 6:30 pm ] |
| Post subject: | |
Stan Wright wrote: Here's what I did: http://liberty.eurekaboy.com/kennedy.htm
As you mentioned, the larger of the two lines is the line you'll need. I can't flare tubing to save my life so I just double clamped the hose. Thanks, Stan! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|