| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| CRD Electrical Buss Trailer Plug? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=26700 |
Page 1 of 1 |
| Author: | yakers [ Mon Nov 19, 2007 1:49 am ] |
| Post subject: | CRD Electrical Buss Trailer Plug? |
Is there a plug in position for a trailer brake controller plug in the CRD trailer buss or will I have to connect the controller to a fuse in the fuse panel? |
|
| Author: | Cowcatcher [ Mon Nov 19, 2007 12:46 pm ] |
| Post subject: | |
If you have the factory trailer hitch option you will find a bundle of wires behind a plastic panel under the drivers side dassh that is taped shut. Behind this you will find a wire marked "Brakes" that runs to you wire connector to the rear and it wired to the correct pin on the plug. Some have located a "Trailer" fuse in the panel but nobody knew exactly what that meant. I believe they used it for their brakes. I followed the brake manufacture's guidlines and ran directly to the battery with a 20 amp brakeer on the positive side. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|