| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| CEL Code 0069 http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=27383 |
Page 1 of 1 |
| Author: | alrhall [ Mon Dec 10, 2007 2:04 am ] |
| Post subject: | CEL Code 0069 |
I have a harbor Freight scanner. I keep getting 0069. I think it is P069? I stays in for a while then clears itself. If I leave the scanner on for 4 scans it clears immediately. It comes in when I am driving around town. I think the Idle gets noisier also, but I'm not sure. ANY Ideas?? 2006 CRD ~15K mi |
|
| Author: | Sir Sam [ Mon Dec 10, 2007 2:06 am ] |
| Post subject: | |
the P only stands for powertrain, the obdii protocol supports body codes too. |
|
| Author: | gmctd [ Mon Dec 10, 2007 3:26 am ] |
| Post subject: | |
P0069 is Barometric Pressure correlation - used to determine MAP and corrected flow thru the MAF - prolly need to pull your MAP sensor and clean it up - also check your ducting between the MAF sensor and the turbo input, see if it is deformed, leaking |
|
| Author: | alrhall [ Sun Jan 24, 2010 5:20 pm ] |
| Post subject: | Re: CEL Code 0069 |
I should have said this sooner. Cleaned the sensor code cleared for 5K mi. Cleaned the sensor. Al |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|