Bovie wrote:
Here is the real problem when I put the transmission dip stick back on the hole tight the engine vibrates it loose almost to the point it is either not or it's just barely sealing the tube.
Any of you guys have the same problem?
Next time I'm at the dealership I'm going to ask them to check it, maybe I have a defunct dip stick.
I had that too. Dipstick would reverse itself about 10-20 centimeters out of the tube. Problem went away by itself. My dipstick is made from two parts. I believe you can have the dipstick in in two positions. One bends it away from the assembly of the two sticks and one bends into the assembly of the two sticks. Try changing which way it bends and problem should go away.
Alternatively just put it back in, it will slowly turn in the tube cased by the vibration and find its own place to settle. Keep putting it back in. I had to do this two times before it was ok.