I keep noticing this in the maintenance schedule, but can't find it in the FSM. Can someone tell me where it is, how I tell if it needs to be changed, etc?

_________________
'06 Stone White, CRD Limited
CRD Frankenlift II, Rock Lizard Rear Bumper, Mann Provent, GDE FT-ECO Tune, "Euro Torque Converter, Transgo 545RFE-H2 Shift Kit, 245/75 MT/R's on Moabs, Full Mopar Skids, Front Tow Hooks, CAT 2 Fuel filter and bleeder valve mod, Fumoto valve, Wahlbro Lift Pump, Custom 2 1/2" Exhaust

i think it is the small filter on the passenger side of the truck by the PS res.

it looks like an inline fuel filter

_________________
Trevor

'05 Limited CRD Inferno Red Pearl Coat
Home made provent installed @ 35443, SEGR installed @ 35466, Fumoto valve @ 37500, trans and transfer case skid, In tank pump installed @ 43500, Suncoast TC & Transgo Shift Kit @ 44730, EGT, Boost, Trans temp gauges, Samco hoses, Rebuilt Trans w/ HD454RFE kit @ 56K, Inmotion Stage 2 @ 56K

Yeah, it looks like a little lawnmower fuel filter dangling there in the engine bay above the passenger front tire. I took mine off and I could easily suck air through it, so I put it back on. I might change it at 50k.

_________________
05CRD: GDE Hot ECU & TCM tunes, Provent, Cat filter, Facet lift pump, TransGo kit, Florida TC, Samcos, stainless brake lines, HDS thermostat, Renegade light bar,
RL super sliders, Bilstein adjustables, Al's Gen 4.5 Arms, 235/85-16 Duratracs, DTT rear, Elocker front, EVIC+TPMS, Turbo timer, McNally pillar gauges, Weeks Stage II kit.