I started to take my jeep apart to replace the torque converter. I got as far as taking the starter out
and I found the bottom of the EGR cooler/valve covered in oil. It still had the glossy wet shine to it
so I know it's fresh. The top of the starter was clean. I can't see the top of the egr to see if the oil is
coming from some where else. If I remember, the egr cooler uses the engine cooling system to
cool down the exhaust. So back together it goes and off to the dealer. I looked at some pictures of just
the engine itself, and I can not find anywhere that the oil could be leaking from. Any suggestions?

Thanks