| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| CRD Engine Oil pan drain plug thread size http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=31684 |
Page 1 of 1 |
| Author: | warp2diesel [ Sat Apr 19, 2008 9:22 pm ] |
| Post subject: | CRD Engine Oil pan drain plug thread size |
I changed my oil yesterday and with all of the problems reported on stuck CRD Engine Oil Pan drain plugs, I took the time to use my machinist tools to determine the correct size. It looked close to 16mm but when I checked for both 1.25mm and 1.5mm pitch, the gauge would not fit, then I tried the 18TPI and it fit like a dream. Next I used a micrometer to check the diameter and it was 0.625 = 5/8". CRD Engine Oil Pan Drain Plug Size is: 5/8" X 18 TPI Steve |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|