LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
brake controller NO tow package http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=33499 |
Page 1 of 1 |
Author: | ccattie [ Fri Jun 20, 2008 11:11 am ] |
Post subject: | brake controller NO tow package |
I have an 06 without the tow package. Do I still have the wiring inside under the drivers dash for a brake controller? I'm thinking of getting a pop up camper and want to have all my ducks in a row. -c |
Author: | Joe Romas [ Fri Jun 20, 2008 11:59 am ] |
Post subject: | |
Depends and maybe are the key words ![]() I've found most information here but the site is down just now. http://www.jeepkj.com/forums/viewtopic.php?t=1691 You "might" have the blue wire "if" you have a EVIC. If no EVIC then you'll most likely need both cables that are mentioned at the site ![]() ![]() |
Author: | CRD Sport [ Fri Jun 20, 2008 1:03 pm ] |
Post subject: | |
Here is the write up I used when I installed my brake controller, pretty good info there. http://www.jeepkj.com/forum/showthread.php?t=26895&highlight=Draw-tite+hitch |
Author: | RTStabler51 [ Sat Jun 21, 2008 5:12 pm ] |
Post subject: | |
+1 with CRD Sport. I didn't have the tow package but DO have the EVIC. I just bought hte MOPAR wiring harness and hooked up as described in the provided write up two years ago. Still going good. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |