| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| MAP Sensor CEL http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=35177 |
Page 1 of 1 |
| Author: | DOC4444 [ Mon Aug 18, 2008 7:42 pm ] |
| Post subject: | MAP Sensor CEL |
I forgot to reconnect the MAP plug after cleaning. Wife went to work and it set a CEL. I reconnected upon her return and it seems to run fine, but the CEL remains. My ACTRON pocket scanner indicates "No Codes" so it can't clear the CEL. Anyone know if it will clear itself after a series of start/stop cycles? If so, any idea how many it should take? Thanks, DOC |
|
| Author: | dgeist [ Mon Aug 18, 2008 9:30 pm ] |
| Post subject: | Re: MAP Sensor CEL |
DOC4444 wrote: I forgot to reconnect the MAP plug after cleaning. Wife went to work and it set a CEL. I reconnected upon her return and it seems to run fine, but the CEL remains. My ACTRON pocket scanner indicates "No Codes" so it can't clear the CEL.
Anyone know if it will clear itself after a series of start/stop cycles? If so, any idea how many it should take? Other CEL errors take 3 to clear (that's complete warm-up/cool-down). Dan |
|
| Author: | Joe Romas [ Tue Aug 19, 2008 7:23 am ] |
| Post subject: | |
On a recent 1500 mile vacation trip pulling our 3500 pound travel trailer I was getting intermittent cel's  It would come on and go off with continious driving  Once back home upon reading the codes I discovered the plug on the MAP was not totally seated 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|