| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Brake Controller Wiring Harness http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=35475 |
Page 1 of 1 |
| Author: | fastRob [ Thu Aug 28, 2008 12:39 pm ] |
| Post subject: | Brake Controller Wiring Harness |
Where might I purchase a Brake Controller Wiring Harness? Any suggestions on a brake controller as well? The trailer is getting new brakes and it is time to test this rascal out with a load. |
|
| Author: | RTStabler51 [ Thu Aug 28, 2008 11:50 pm ] |
| Post subject: | |
I got the Teknosha Prodigy (sp?). There isn't a wiring harness for it that works on the jeep as there is for some of the dodges. Its only 3 wires though and relatively easy. |
|
| Author: | Joe Romas [ Fri Aug 29, 2008 5:36 pm ] |
| Post subject: | A couple of questions first |
Do you have a factory towing package? Do you have a EVIC? Both of these questions are revelent to your question. As stated "there's no brake harness"  But you might have the blue wire depending an the answeres to the above. Also see this thread.
http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=33499 |
|
| Author: | hatchetman [ Fri Aug 29, 2008 8:35 pm ] |
| Post subject: | |
My Prodigy has 4 wires, 12v hot, 12v negative, trailer brake wire, and wire to brake light/pedal. |
|
| Author: | fastRob [ Sat Aug 30, 2008 2:01 am ] |
| Post subject: | Here is what Chris did |
http://www.chrispitude.net/index.php?al ... 24&start=0 |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|