| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Torque converter the same between our 545RFE and the 45RFE? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=35565 |
Page 1 of 1 |
| Author: | Sir Sam [ Mon Sep 01, 2008 7:30 pm ] |
| Post subject: | Torque converter the same between our 545RFE and the 45RFE? |
having a hard time finding the part numbers here...................but is our torque converter the same as the 45RFE found behind the 4.7 and 5.7s with the 45RFE? |
|
| Author: | gmctd [ Mon Sep 01, 2008 8:38 pm ] |
| Post subject: | |
5175969AB - may be same as 4.7L, but def not same as the Hemi - the Suncoast CRD TC is the Hemi version, race-hardened Primary differences in the 45\545 grouping are aggressiveness of the impeller and turbine vanes - other than that they interchange - if you need a high-stall number, use the KJ CRD tc on the Hemi to keep the rpms up in the Hemi power band - at least, it will..............until the plastic stator shattors.............. |
|
| Author: | danoid [ Tue Sep 02, 2008 11:43 am ] |
| Post subject: | |
The part numbers aren't the same due to internal differences (stall speed / lockup clutch material) but they will interchange. The most likely difference you will see is the different stall speed. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|