Any happen to know the inside diameter of the filler neck on the US CRDs? I'm about to buy some fuel cans that have either 3/4 or 1' neck. I'd like to get the larger but don't know if it'll fit (and I'm not at the same place as the jeep is).

Thanks.
Dan

_________________

2005 Silver CRD Limited
245/75R16 GoodYear Duratracs
Fumoto drain | ProVent CCV Filter
Stanadyne FM100 filter | Cummins fuel pump
GDE Eco | SEGR | BoulderBars | FrankenLift | Frankenskids

1" OD may be tight, but should work. For filling with B100, I use a 3/4" ID (1"OD) PVC hose, and it just fits.

_________________
'05 Liberty CRD B100, SEGR - SOLD

'01 Beetle TDi B100, EGR delete
'83 Mercedes 240D B100, no EGR

--- SEGR Builder ---

Cool. I'll stick with 3/4", then. Besides. Looks like the 1" are out of stock

_________________

2005 Silver CRD Limited
245/75R16 GoodYear Duratracs
Fumoto drain | ProVent CCV Filter
Stanadyne FM100 filter | Cummins fuel pump
GDE Eco | SEGR | BoulderBars | FrankenLift | Frankenskids

Of course, you could always pull the filler neck and dremel out that stupid interior plastic crap. I don't have any problems filling up at the thunder-nozzles now at Flying J...