Hi guys,

I just have a quick question. Is the daystar lift for the diesel the same as the lift for the gassers minus the top plates in the front? I was sent the wrong kit but all the instructions look the same and so do the parts. I'd really rather not have to wait on sending this one back and then waiting forever to get a new one. If anyone knows and could drop me a line that would be great. Thanks again ... Chris

_________________
06 Black CRD Limited

i'm gonna take a stab and say no... the CRD engine is much
heavier than the patooie engine

_________________
Trevor

'05 Limited CRD Inferno Red Pearl Coat
Home made provent installed @ 35443, SEGR installed @ 35466, Fumoto valve @ 37500, trans and transfer case skid, In tank pump installed @ 43500, Suncoast TC & Transgo Shift Kit @ 44730, EGT, Boost, Trans temp gauges, Samco hoses, Rebuilt Trans w/ HD454RFE kit @ 56K, Inmotion Stage 2 @ 56K

You can use either the 1,5"/2" or the fullsize 2,5" lift on a CRD.

First one tested by me.

See http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=29217

_________________
Cherokee 2,5 CRD: sold - Wrangler TJ 2.5: gone - Touareg V10 TDI: new toy

Solo Liberty en Español: Jeepliberty.es