LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Did the suncoast fixed your shudders ?
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=41577		 Page 1 of 1
Author:  007husky [ Thu Mar 26, 2009 11:46 am ]
Post subject:  Did the suncoast fixed your shudders ?
after installing mine, and only having the effect of the shudders reduced, im wondering if others got it cured to 100%..

I just spent 1600 bucks on a solution that didn`t work 100 % :(
Author:  chadhargis [ Thu Mar 26, 2009 12:25 pm ]
Post subject: 
I can't vote...no option for "no change".

I still have the shudder. At first, I thought it was better, but it's not.
Author:  RTStabler51 [ Thu Mar 26, 2009 12:30 pm ]
Post subject:  Re: Did the suncoast fixed your shudders ?
007husky wrote:

I just spent 1600 bucks on a solution that didn`t work 100 % :(
Is that just for R&R or does that include the Suncoast? I want the Suncoast more for the towing I do. Sorry to hijack.
Author:  007husky [ Thu Mar 26, 2009 12:50 pm ]
Post subject:  Re: Did the suncoast fixed your shudders ?
RTStabler51 wrote:
007husky wrote:

I just spent 1600 bucks on a solution that didn`t work 100 % :(
Is that just for R&R or does that include the Suncoast? I want the Suncoast more for the towing I do. Sorry to hijack.


that was parts and labor.
Author:  007husky [ Thu Mar 26, 2009 12:51 pm ]
Post subject: 
chadhargis wrote:
I can't vote...no option for "no change".

I still have the shudder. At first, I thought it was better, but it's not.


wow you are right, sorry i didn`t though there would be someone with no change :(

can polls be edited?
Author:  gmctd [ Thu Mar 26, 2009 1:06 pm ]
Post subject: 
Chad, does yours shudder with the Transgo pressure resistor in-circuit - and what ATF was installed with the Suncoast?

Husky, did you delete that flex coupling in the exhaust downpipe, and did you use the oem exhaust hangers?
Author:  007husky [ Fri Mar 27, 2009 11:35 am ]
Post subject: 
gmctd wrote:
Chad, does yours shudder with the Transgo pressure resistor in-circuit - and what ATF was installed with the Suncoast?

Husky, did you delete that flex coupling in the exhaust downpipe, and did you use the oem exhaust hangers?


The flex coupling is still in there, (should it be deleted?)

I `m using the stock hangers too.

What i did is gut the cat, and cut the muffler off, then weld 2 bent pipes ( don`t have a pipe bender and was really not going to pay 100 bucks to a muffler shop to make me one), So the downpipe aligned with the exhaust pipe and that is it :)

My welds are by no means, profesional and some said they might rust quicker and become britle, but so far they have held on great. (if they break, i weld them again).
Author:  gmctd [ Fri Mar 27, 2009 12:34 pm ]
Post subject: 
You done good, then - that flex and those oem rubber-isolated hangers help to reduce drivetrain vibrational resonances into the floorpan of your unibody-construction vehicle - angles\leaks or curves in the piping affect exhaust gas flow, but not resonances
Author:  ihavelotsoftoys [ Tue May 05, 2009 3:05 pm ]
Post subject: 
NOPE, Still shudders.
It rides a lot better with the lower stall speed and I like the performance with the InMotion stage II, but I may have to go down to the ECO tune. The vehicle never shuddered until I chipped it.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/