| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Inner tie rod http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=41640 |
Page 1 of 1 |
| Author: | kccrd [ Sat Mar 28, 2009 3:37 pm ] |
| Post subject: | Inner tie rod |
Anybody had to replace a inner tie rod I just had my front end inspected and found out the drivers side has a little play and should be replaced. I am trying to find the moog part # so I can little shimmy in the steering wheel. |
|
| Author: | tonycrd [ Sat Mar 28, 2009 5:54 pm ] |
| Post subject: | |
Here ya go: MOOG EV402 http://www.energysuspensionparts.com/proddetail.asp?prod=MOOG-EV402 |
|
| Author: | gmctd [ Sat Mar 28, 2009 9:53 pm ] |
| Post subject: | |
KJ's have rack'n'pinion steering - there is only the rack and it's extension rods and one left tierod end and one right tierod end, neither of which look like that example................... |
|
| Author: | tjkj2002 [ Sat Mar 28, 2009 11:39 pm ] |
| Post subject: | |
gmctd wrote: KJ's have rack'n'pinion steering - there is only the rack and it's extension rods and one left tierod end and one right tierod end, neither of which look like that example................... Notice the words under the pic?
The KJ's rack&pinion uses inner and outer tie rod ends which both can be replaced. The inner tie rod the KJ uses looks like the pic below. 
|
|
| Author: | gmctd [ Sun Mar 29, 2009 11:05 am ] |
| Post subject: | |
gmctd wrote: KJ's have rack'n'pinion steering - there is only the rack and it's extension rods and one left tierod end and one right tierod end, neither of which look like that example...................
Notice the words "one left tierod end and one right tierod end, neither of which look like that example" ? Still holds true - get all your ducks in a row, eh, or just post the additional info as required................... |
|
| Author: | tonycrd [ Sun Mar 29, 2009 2:54 pm ] |
| Post subject: | |
Here you go if you are still in doubt if it's the inner or the outer tie rod: http://jeepinbyal.com/prod-Moog_Inner_Tie_Rod_End-484.aspx |
|
| Author: | kccrd [ Sun Mar 29, 2009 4:37 pm ] |
| Post subject: | |
Thanks for all your help I'll get it ordered this week and hopefully get it replaced next weekend. |
|
| Author: | warp2diesel [ Sun Mar 29, 2009 4:54 pm ] |
| Post subject: | I vote worthy of Haystack recognition |
tonycrd wrote:
Good Job Tony 
|
|
| Author: | tjkj2002 [ Sun Mar 29, 2009 7:27 pm ] |
| Post subject: | |
gmctd wrote: gmctd wrote: KJ's have rack'n'pinion steering - there is only the rack and it's extension rods and one left tierod end and one right tierod end, neither of which look like that example................... Notice the words "one left tierod end and one right tierod end, neither of which look like that example" ? Still holds true - get all your ducks in a row, eh, or just post the additional info as required................... |
|
| Author: | warp2diesel [ Sun Mar 29, 2009 7:37 pm ] |
| Post subject: | Can you buy Tie Rod assemblies |
tjkj2002 wrote: gmctd wrote: gmctd wrote: KJ's have rack'n'pinion steering - there is only the rack and it's extension rods and one left tierod end and one right tierod end, neither of which look like that example................... Notice the words "one left tierod end and one right tierod end, neither of which look like that example" ? Still holds true - get all your ducks in a row, eh, or just post the additional info as required................... Or does that make too much sense. Ten years ago, many parts suppliers offered this option and most were smart enough to know that assembled did not mean pre-aligned. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|