| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| SEGR function Check http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=41667 |
Page 1 of 1 |
| Author: | bigugly [ Sun Mar 29, 2009 6:13 pm ] |
| Post subject: | SEGR function Check |
All, I know there was a previous post on how to check the SEGR for proper function. A friend of mine put the kit together and we want to make sure it works right before install in the JEEP. If anyone could help me out with the procedure I would really appreciate it. |
|
| Author: | warp2diesel [ Sun Mar 29, 2009 7:29 pm ] |
| Post subject: | If I remember right |
Turbo Tim is who I thought is the inventor and UFO assembles kits for others, I am sure his look better than mine does. I found the drawings that were posted and downloaded them for mine. I have yet to finish up and install it. Work and Honey do are so demanding. 
|
|
| Author: | moto-scoot [ Sun Mar 29, 2009 10:21 pm ] |
| Post subject: | |
your diagrams are wrong for the new board connections http://img530.imageshack.us/img530/1940/segrpic.jpg |
|
| Author: | Turbo Tim [ Sun Mar 29, 2009 10:37 pm ] |
| Post subject: | |
Someone else here also found out that you can get the transmission sense (T41 Sense) at the engine computer connector C2-17. This way you don't have to go over to the transmission computer to get it for the SEGR. I don't know how I missed that one, but it was a good catch! |
|
| Author: | moto-scoot [ Sun Mar 29, 2009 11:15 pm ] |
| Post subject: | |
when your done testing use this for wiring install http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=27359 |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|
