LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

EHM - plugging the hose from the CCV
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=43348
Page 1 of 1

Author:  dog_party [ Wed May 20, 2009 10:40 am ]
Post subject:  EHM - plugging the hose from the CCV

If one were to do (or have done) the EHM, what might one have used to plug the stock hose that is removed from the CCV?

Author:  honey_don't [ Wed May 20, 2009 10:53 am ]
Post subject: 

One might find that a synthetic wine cork works well.

Author:  dog_party [ Wed May 20, 2009 11:00 am ]
Post subject: 

Ahhh, another reason to pop the cork. I like it!

Author:  bdptp73 [ Wed May 20, 2009 12:02 pm ]
Post subject: 

I used a 3/4" pipe plug and a hose clamp. Might have been a 1/2" pipe plug,

Author:  mackruss [ Wed May 20, 2009 2:12 pm ]
Post subject: 

honey_don't wrote:
One might find that a synthetic wine cork works well.


Wine cork...

Author:  0311_DoC [ Wed May 20, 2009 3:40 pm ]
Post subject: 

i just used a wooden dowel that I bought at lowes

Author:  RAF 3829 [ Wed May 20, 2009 7:16 pm ]
Post subject: 

Took a bolt about 4" long that fit the hose and cut the threads off the end, deburred the end, and stuck it in the hose. Hose clamped it too.

Author:  SC RIGGR [ Wed May 20, 2009 7:17 pm ]
Post subject: 

A Spark Plug is a funny thing to find in a diesel. just dont connect a coil!

Author:  CRDMiller [ Wed May 20, 2009 8:21 pm ]
Post subject: 

Nice, spark plug :P

I used a bolt and a pair of hose clamps. If she finds a way to suck that in, well, let her have it.

Author:  Turbo Tim [ Wed May 20, 2009 8:26 pm ]
Post subject: 

kant membr waht cind of whine it wuz, butt sure goode. Nise gud lokin cork tat fixd tat hole..........

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/