| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Serpentine belt replacement Q http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=43405 |
Page 1 of 1 |
| Author: | CRD Joe [ Thu May 21, 2009 9:00 pm ] |
| Post subject: | Serpentine belt replacement Q |
I searched for this info. all over the place. Im sorry if its a super repeat. Im picking up an '05 CRD with 43500 miles on her. Id like to replace the serp belt as it hasnt been done before. Should I replace the tensioners as well? If so there are three correct? Anyone know the cost of each? Thank you Tom |
|
| Author: | BlackLibertyCRD [ Thu May 21, 2009 9:24 pm ] |
| Post subject: | |
I have over 70K on mine and it's fine. I will replace it when the timing belt comes due. |
|
| Author: | kccrd [ Fri May 22, 2009 12:17 pm ] |
| Post subject: | |
I have 109,000 now and my belt looks great I just put a little high temp grease on the center of my pulleys and that quieted them down a lot no problem since I did that a year ago. |
|
| Author: | RTStabler51 [ Fri May 22, 2009 2:24 pm ] |
| Post subject: | |
that' makes me feel better. I have almost 64k on the stock. But how in the hell do these belts last so long? |
|
| Author: | moto-scoot [ Fri May 22, 2009 10:09 pm ] |
| Post subject: | |
mines got 91700 on it |
|
| Author: | ATXKJ [ Fri May 22, 2009 10:52 pm ] |
| Post subject: | |
Manual says 37500 for schedule B, 62500 schedule A I replaced the belt at 37500 - I figured I'd do belt and tensioners at 75,000 There's this concept - it's called preventative maintenance it means it's easier to change parts in your driveway - than on the side of the road. it may cost a little more - but I really don't like changing things on the side of the road. Mopar parts america http://www.moparpartsamerica.com/splash/index.cfm?siteid=214583 tensioner 155 idler 60 belt 90 |
|
| Author: | tonycrd [ Sat May 23, 2009 5:52 am ] |
| Post subject: | |
You'll be in for a big surprise ($$$$) if you want to change out the entire tensioner... Here's what I did. http://www.jeepkj.com/forum/showthread.php?t=33393 |
|
| Author: | wolcott [ Sat May 23, 2009 5:13 pm ] |
| Post subject: | |
I tried to look up a seller of Meyle 100145003 pulleys in the US and had no luck. Can anyone recommend one? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|