Has anybody used this on a crd? It did wonders to my 300sd.

_________________
2005 Liberty CRD
235/75R16 Firestone Destination's, Fumoto Valve
Boiler's Aluminum Roof Rack

What is it? How does it work? What are the potential effects on the injector pump?

_________________
In this war of lines, so many have been crossed. Where will it all stop?

2006 Deep Beryl Green CRD Sport *SOLD 1/22/12*
Provent, V6 Airbox, Fumoto, Samcos, GDE ECO & TCM Tune, Euro JK TC, Magnaflow Catback
245/70/16 Destination A/T's
Boiler's Radiator Skid Plate
Jeepin' By Al 2.5 inch Adjust-A-Strut Lift, JBA Gen 4.5 UCA's (6/5/10)

I think that if you run some bio, your fuel system is clean, including the injectors.

I think that it is possible that this stuff could clean deposits from the heads etc but really, so would your right foot.

This stuff has been around for a long time and alot of people use it, so it's not going to hurt. Folks use it in cp3's on dmax all the time, and on vp44's etc etc.

It seems that when you hook up your return line to the same container that you use as your source line (witch is holding the additive) it changes color apparently indicating that it is cleaning stuff.

It is supposedly not effective if simply dumped into the tank.

Some people claim amazing results, like "it's a night and day difference on my 300td" etc, and some say they see no difference.

My vote is just find some b100 and buy a freeking fuel filter, or two.

Again it's not going to hurt, it's probably fun to do. (it does not make a smokescreen so it's going to be mental fun)

You can get it at napa, and others. :P

Lubro Moly does make some excellent oils.

_________________
06 CRD Limited. IMII, GDE TCM, Carter transfer pump, Upgraded oem primary, 2 micron secondary, 3 inch mandrel straight pipe.
Transgo shift kit, EHM, fcv butterfly removed, egr plated off. 19 3/8 solid flex fan, no electric fan, 10k lb aux trans cooler.
Frankenlift II, Mopar skids, allj's rails, 235/85 km2 on stock rims