LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Good deal on Provent 200
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=43828		 Page 1 of 2
Author:  KJ 119 [ Wed Jun 03, 2009 9:48 pm ]
Post subject:  Good deal on Provent 200
Was about to come home from work and order my Provent,when my Dad calls me about a place 5 minutes from my house with Provent 200 for 129.95. Passed by after work and drove home with my Provent.
And then to top it off my Dad passes by with 2 booklets on the Provent,Biohazard KJ CRD's writeup,and all the stainless hose clamps. :)

Thought I'd pass along a deal when I come across one.The guy at the counter was curious as to what I was going to use it on,because he doesn't sell too many of them over the counter.When I told him of the Jeep CRD he said I was his first Jeep,and then went on about how many he ships out to the Volkswagn guys.Told him he might be hearing from more Jeepers. :wink:

Reliable Industries,Inc.
Filter & Exhaust
600 St.George,Suite B
Jefferson,La 70121
Telephone 504-733-4120 Fax 504-733-3293
Item # 3931070550 MANN CCV Filter Assy. Unit Price $129.95

http://www.reliableindustries.com/ri-fi ... house.html
Author:  liberty2.8 [ Thu Jun 04, 2009 6:20 pm ]
Post subject: 
Let us know how it works out for you. I was just out in Metairie this morning for a funeral then on to Carmine's for lunch. Coulda swung by and picked one up myself.
Author:  linewarbr [ Fri Jun 05, 2009 10:13 am ]
Post subject: 
So what ultimately made you go with the Provent over just the EHM?
Author:  KJ 119 [ Fri Jun 05, 2009 6:23 pm ]
Post subject: 
linewarbr wrote:
So what ultimately made you go with the Provent over just the EHM?


I do a lot of camping and I have a dual battery /inverter setup,so I often idle the jeep for a charge.
Not much I can do about the exhaust but if I can get rid of the EHM smell and oil deposits"Why not?"
Besides that,the price was right!
I got my SEGR yesterday so if you wanna do the dang thang,I'll Provent and SEGR tomorrow if you down.


For the local CRD's Reliable Filter is located behind the Entergy bld. off Jefferson Hwy,by the Huey P. Long bridge.
Author:  KJ 119 [ Sat Jun 06, 2009 8:02 pm ]
Post subject: 
Installed the Provent today.Used hardwall marine hose.
Also ran SEGR harness into engine bay.
I plan to make the terminations in the morning,so linewarbr if you want to come in town tomorrow,I'll hook you up.
I can throw you out those front tow hooks also.
Author:  dieseldoesit [ Wed Jun 10, 2009 2:20 pm ]
Post subject: 
Thanks for the link. I just bought one. Should be installing in next week when it gets here.

Thanks again.
Author:  KJ 119 [ Wed Jun 10, 2009 3:58 pm ]
Post subject: 
dieseldoesit wrote:
Thanks for the link. I just bought one. Should be installing in next week when it gets here.

Thanks again.

No problem Bro,hopefully more members post that they bought one,at this price you can't go wrong.

Be sure to mention that it's for the Lib CRD.
Author:  linewarbr [ Wed Jun 10, 2009 5:23 pm ]
Post subject: 
I'm disappointed I missed it. Saturday was my birthday, so I was "occupied" Friday night when you posted. . . 8)
Author:  dieseldoesit [ Wed Jun 10, 2009 5:31 pm ]
Post subject: 
Missed what? I ordered today, just a little while ago. Got the price that was quoted in the original post.
Author:  CRD Joe [ Wed Jun 10, 2009 6:49 pm ]
Post subject: 
Where can you buy spare filters?
Author:  KJ 119 [ Wed Jun 10, 2009 10:02 pm ]
Post subject: 
dieseldoesit wrote:
Missed what? I ordered today, just a little while ago. Got the price that was quoted in the original post.


He only missed out on a free SEGR install. :shock:
Happy B-Day Linewarbr.

CRD Joe, I'm sure this place carries them,but looks like they can be cleaned instead of replaced.But I'm a Provent nubie so what do I know.
Author:  KJ 119 [ Mon Jun 22, 2009 5:35 pm ]
Post subject: 
KJ 119 wrote:
For the local CRD's Reliable Filter is located behind the Entergy bld. off Jefferson Hwy,by the Huey P. Long bridge.


Just got back from Reliable(Picking up a Pro 200 on willcall for fellow Lost member Shaggyislandstud),and Glen at the counter advised me that they are moving to:
5739 G Street
Harahan,La 70123
This is off Jefferson Hwy on to Edwards Ave,fourth street on left.Across from Pepsi St.
Author:  KJ 119 [ Sun Jul 12, 2009 9:27 pm ]
Post subject: 
Just drained the Provent today and was amazed at what I use to allow into my turbo.

Thought I would bump this one back up for all those who haven't provented,or at least EHM'd yet.
IT'S NOT TOO LATE!.....Do it to it.
Author:  Joe Romas [ Sun Jul 12, 2009 9:44 pm ]
Post subject: 
I have a provent and took it off! The filter plugged in about 6 to 8 k miles :shock:
Author:  onthehunt [ Mon Jul 13, 2009 12:40 am ]
Post subject: 
I have aout 30,000 on mine. Original filter. Normal service life is around 80,000 miles depending on conditions.
Author:  gmctd [ Mon Jul 13, 2009 9:43 am ]
Post subject: 
The fiter media is synthetic - clean it with Diesel fuel or paint thinner, damp-dry with paper towels, or autozone engine cleaner in the orange and white can with a hot-water rinse, self-drying by evaporation - replacement filters are ~$45 - try it, you'll like it...................
Author:  MACKJ [ Mon Jul 13, 2009 11:11 pm ]
Post subject: 
gmctd wrote:
The fiter media is synthetic - clean it with Diesel fuel or paint thinner, damp-dry with paper towels, or autozone engine cleaner in the orange and white can with a hot-water rinse, self-drying by evaporation - replacement filters are ~$45 - try it, you'll like it...................


X2
Cleaned mine with mineral turpentine (white spirits) and dried b4 reinstall.
Author:  KJ 119 [ Sun Aug 30, 2009 9:21 pm ]
Post subject: 
BUMP for my Provent homies.
Author:  mackruss [ Mon Aug 31, 2009 4:16 am ]
Post subject: 
Where in the engine bay are you guys installing the Provent?
Author:  retmil46 [ Tue Sep 01, 2009 10:17 pm ]
Post subject: 
mackruss wrote:
Where in the engine bay are you guys installing the Provent?


Location of choice on U.S. versions seems to be on the passenger side just behind the vacuum boost controller for the turbo, outboard the coolant tank.
Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/