LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Diff Cover Install Pics
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=45102		 Page 1 of 1
Author:  DocB [ Sat Jul 18, 2009 2:35 pm ]
Post subject:  Diff Cover Install Pics
Just thought I'd share some pics of the cover on the Jeep.
It's the Rock Lizard cover he offered awhile back that I powder coated
and drilled and tapped for a temp sensor and larger drain plug.
Changed the oil to Sever Gear 75W-140 and used a LubLocker gasket.
We had to relieve both the left and right insides a little to make room for
the cap tab brackets.
All in all, it's a really nice, stout piece and I don't think a rock will peal it off.
I'm getting a little excited because more nice stuff is coming real soon.
Just waiting on some help from some friends in the technical department.
Enjoy:

Image
Image
Image
Author:  nescosmo [ Sat Jul 18, 2009 5:12 pm ]
Post subject: 
I just bought one differential cover from Ruffstuff and it is just like that one, very heavy and made of #50 still.
Author:  DocB [ Sat Jul 18, 2009 7:16 pm ]
Post subject: 
nescosmo,

Before install, lay it on a flat surface to make sure the mating face is flat.

Just sayin'.
Author:  KJ 119 [ Sat Jul 18, 2009 8:07 pm ]
Post subject: 
Sweet cover there DocB.
Great idea with the temp sensor. :idea:
Author:  nescosmo [ Sun Jul 19, 2009 3:03 am ]
Post subject: 
DocB wrote:
nescosmo,

Before install, lay it on a flat surface to make sure the mating face is flat.

Just sayin'.



Thanks for the tip all ok.
Author:  CRD Joe [ Sun Jul 19, 2009 12:27 pm ]
Post subject: 
Does it provide for a larger oil capacity?
Author:  DocB [ Sun Jul 19, 2009 10:42 pm ]
Post subject: 
Just a little bit more, about 1/3 Qt.
I thought it would be more than that.
I think the PML pan holds more, but I decided against it because it is aluminum.
Can't afford to bust it on a rock.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/