I like hearing my turbo singing
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| turbo silencer ring http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=46526 |
Page 1 of 1 |
| Author: | zrtwooo [ Fri Sep 11, 2009 12:17 am ] |
| Post subject: | turbo silencer ring |
i have a cummins that has a turbo silencing ring...anyone know if there is one on the libby? thx... |
|
| Author: | Turbo Tim [ Fri Sep 11, 2009 12:42 am ] |
| Post subject: | |
Hun? |
|
| Author: | Joe Romas [ Fri Sep 11, 2009 6:12 am ] |
| Post subject: | |
I like hearing my turbo singing
|
|
| Author: | zrtwooo [ Fri Sep 11, 2009 9:56 am ] |
| Post subject: | let me clarify |
I wanna take the ring out if it has it...also my cummins had a bunch of sound deadening baffles in the intake, does the libby? |
|
| Author: | Turbo Tim [ Fri Sep 11, 2009 10:38 am ] |
| Post subject: | |
I have a Cummins too. I have never heard of such a thing. Where is this "Ring" located? I wonder if it has another purpose in life and goes by a different name. |
|
| Author: | Diggerfreek [ Fri Sep 11, 2009 11:12 am ] |
| Post subject: | |
I've heard of it, but I don't have a clue as to where it is or what it looks like |
|
| Author: | GreenDieselEngineering [ Mon Sep 21, 2009 10:53 am ] |
| Post subject: | turbo siliencers |
There are several different styles of turbo silencers and resonators, however the KJ CRD does not have one installed from the factory and there is no baffling in the intake either. The resonators are usually tuned for a specific frequency to dampen the turbo "whine". This is typically done to reduce airborne noise and does not impact performance. Resonators are very common on high end diesel products like the BMW, VW and Mercedes. The newest Jeep products for the European market are also using a resonator. |
|
| Author: | Tinman [ Mon Sep 21, 2009 1:04 pm ] |
| Post subject: | |
No such thing on the libby. Some turbo whine would be cool but the turbo is too small. |
|
| Author: | nescosmo [ Tue Sep 22, 2009 2:12 am ] |
| Post subject: | Re: turbo silencer ring |
zrtwooo wrote: i have a cummins that has a turbo silencing ring...anyone know if there is one on the libby?
thx... I think that that is call a resonator and the CRD do not have it. now the Sprinter van do have it. |
|
| Author: | nursecosmo [ Tue Sep 22, 2009 2:35 am ] |
| Post subject: | |
Turbo Tim wrote: I have a Cummins too. I have never heard of such a thing. Where is this "Ring" located?
I wonder if it has another purpose in life and goes by a different name. It is an Aluminum funnel shapped ring which encircles the compressor mouth on Holset turbos. There is a definite increase in the whine heard from the compressor when it is removed, but I put mine back in because I figured that the harmonics might bad for the vanes. |
|
| Author: | RAF 3829 [ Tue Sep 22, 2009 6:17 am ] |
| Post subject: | |
Turbo siencer ring http://www.dodgeram.org/tech/dsl/FAQ/fi ... lencer.jpg Dodge is about the only application that you'll find the ring in the turbo. Most 24V medium duty trucks don't have it. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|
