I would like to replace the front springs with a heavier rate spring, but do not want to change the ride height.

Plan on installing Bilstein shocks and struts all around.

Any ideas?

_________________
06 CRD LIMITED- Factory Belly Armor, Hooks.
EHM, MagnaFlow SS Cat Back, FS-2500, HDS 001 TStat, Some Gauges, PML Trans Pan, PML Diff Cover, Marinco Mod, FIA Blanket, Cooper Discoverer ATR 225/75, CTS 245/70, Front-JBA 2.25" C/Os, Rear-OME HD, JBA UCA, SS Brake Lines.

The only way to do that is to have custom coils made.



http://www.coilsprings.com/

Are you sure?

No one else has ever had the need or has done this?

Why is it that I always have to custom make everything! For once I would like to just buy something off the shelf!

_________________
06 CRD LIMITED- Factory Belly Armor, Hooks.
EHM, MagnaFlow SS Cat Back, FS-2500, HDS 001 TStat, Some Gauges, PML Trans Pan, PML Diff Cover, Marinco Mod, FIA Blanket, Cooper Discoverer ATR 225/75, CTS 245/70, Front-JBA 2.25" C/Os, Rear-OME HD, JBA UCA, SS Brake Lines.

The CRD only has one choice for a heavier front coil rate(at least in the US) and that is the OME 790 coils but will give you 2" of lift.If you want stock height you either need to order new OEM coils of get custom ones built.The link in my last post there prices are actually pretty good but the wait time is about 6-8 weeks min.

CRD Stu had some custom front springs made by king springs in Australia. I have not heard anything about these springs in couple of years, but IIRCC they were about 300 US/pair plus shipping and they were rated to 450#. Maybe some of our friends down under could chime in on this one. BTW I have a set of stock springs and struts sitting around.

_________________
2005 CRD Sport, Provent CCV, JBA gen 4.5 A-arms
Frankenlift II w/ 3/8" strut plate and extended front Bump Stops
Rear ARB Locker,RL Skink Super Sliders
TJM Front Bumper w/ Warn XD9000
Suncoast TC, Boiler Radiator Skid, Boiler Roof Rack

I checked on CRU Stu's springs when they came out
first - they were the same length as OME so it would be a lift,
second the shipping was as much as the springs ~$300

FYI - the OME's ride great, better than stock.

_________________
2005 CRD
stuff
Skeptic quod gratis asseritur, gratis negatur

Here's what I got from Coil Spring Specialties. Now I will see what shipping looks like.

Hello Josh,

Yes we can engineer and manufacture coil springs for your Jeep Liberty, that will carry the additional load of the diesel, and set the vehicle at the trim height you desire.

Pricing estimate: $198.60 pr to $245.60 pair.

Thank you and I await your response to proceed.

Kevin

Coil Spring Specialties

_________________
2006 Sport CRD
Provent-removed, Snorkel Air box, Raycor fuel head/filter,Omega temp. sensor, Fuel pressure gage, Kennedy Lift pump-not working now, fuel cooler Covered, B&M cooler for trans oil, Suncoast TC/ shift kit, 245/70/16 Firestone Destination A/T's, Amzoil& water in the diffs, mobile 1 0w-40, Radiator blanket
Thanks LOST