MaineSleddah wrote:
Where is the actual opening for my CRD's air intake? I need to screen it off because of friggin mice...
it is located behind the block off plate in the furthest left grill opening.
The easiest way to install a grill is....
1. unplug the two sensors on the air-box and turbo inlet hose - move aside.
2. unclasp airbox lid retaining clips - remove airbox lid/filter element - set aside
3. with a firm grasp, wiggle and pull up on the airbox to remove from fender. Mounting is done with rubber plugs, so don't worry about bolts/screws.
4. remove lower air-box inlet hose from grill section.
5. install screen between grill inlet elbow and lower air-box inlet hose.
6. reassemble.
I did this when I found the carcass and full plumage of an adult blue-jay in my air-box on my last filter change. How it got in there... I will never know!
Login
Register
FAQ
Search
