| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Water temp and oil pressure gauges http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=51119 |
Page 1 of 1 |
| Author: | CRDMiller [ Thu Mar 18, 2010 1:10 pm ] |
| Post subject: | Water temp and oil pressure gauges |
I just (finally) received my oil pressure and water temp gauges, and was wondering if anyone else has installed any. I figure I'll mount the oil pressure sender on the firewall as i don't think it will fit in front of the stock unit, and use a t fitting and run a hose to it? (i don't want to add more fittings and lines due to potential damage or failure/leaking etc but i must?) How bout the water temp? when i changed my t-stat i thought about trying to drill and mount one there, but it seemed to risky for the price, plus i did not have dimensions for my sender unit. |
|
| Author: | racertracer [ Thu Mar 18, 2010 1:32 pm ] |
| Post subject: | Re: Water temp and oil pressure gauges |
CRDMiller, How is your new temperature gauge working, have you noticed better performance? |
|
| Author: | CRDMiller [ Thu Mar 18, 2010 3:21 pm ] |
| Post subject: | Re: Water temp and oil pressure gauges |
I went to napa and they had all of the fittings i needed in stock, i will update the thread after install with photo's. I bought a 1/8 npt tee with one male end (brass) and for the water temp a 1/2 ntp brass tee (three female) with 2 1/2 ntp to 3/8 hose fittings. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|