I've been trying to get my wife Jeep running again..
first it would run but try to accelerate and it would die..
that in this thread. viewtopic.php?f=5&t=51037

at the moment it will not start!!! cranks by no fire:(

what I'm wondering is
could the fuel quality solenoid cause this no start problem.
the ASD is working as it should..I have no air in the line feeding the CP3. however I haven't tried to open the fuel line that feeds the CP3 at the CP3..

if it could cause this problem..ok..I'll remove it and check it tomorrow.. I would just like to know if its worth the time to remove and check it..or just fork over the money for a new CP3..OUCH!! but hey its cheaper than a VP44..
I replaced my VP44 in by Dodge Ram recently..

thanks for the help
-dkenny

_________________
84 BB school bus, DD8.2L turbo ->the transmission died..too expensive to fix..it'll be heading to the scrap yard..4/11)..Bus gone to Scarp 8/23/11
06 Liberty CRD
'99 dodge ram 2500 quad cab, 4x4, 24v
all Biodiesel powered when its warm enough