LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
Do I have an OEM drain plug? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=51161 |
Page 1 of 1 |
Author: | Crankworm [ Fri Mar 19, 2010 8:32 pm ] |
Post subject: | Do I have an OEM drain plug? |
The oil drain plug on my CRD has a large torx fitting to unscrew it instead of a hex head. I stripped the torx fitting out trying to unscrew the SOB this evening and wanted to know if this is the oem plug or if it has been replaced by the previous owner. I think I can get the plug out by using vise grips on the shoulder of the plug but obviously I need to get a new one before I try it. I'll try to get a pic of what I got going on but its dark out. Any help would be apreciated. |
Author: | DOC4444 [ Fri Mar 19, 2010 8:47 pm ] |
Post subject: | Re: Do I have an OEM drain plug? |
You can get a hex head replacement from your dealer. DOC |
Author: | Joe Romas [ Sat Mar 20, 2010 7:32 am ] |
Post subject: | Re: Do I have an OEM drain plug? |
The OEM plug is a 8mm Allen ![]() |
Author: | jinstall [ Sat Mar 20, 2010 9:06 am ] |
Post subject: | Re: Do I have an OEM drain plug? |
If you were closer I would say com by and I will give yo my old one that is sitting in the tool box. |
Author: | DOC4444 [ Sat Mar 20, 2010 10:13 am ] |
Post subject: | Re: Do I have an OEM drain plug? |
Clarification: The original factory drain plug was an allen key style. However, you can buy much more useable hex head plug from your dealer as a superceded part. DOC |
Author: | mikey1273 [ Sat Mar 20, 2010 10:44 am ] |
Post subject: | Re: Do I have an OEM drain plug? |
I have mine in a junk Drawer if you were close by I'd say come over and I'll give it to you. |
Author: | Kniggit [ Sat Mar 20, 2010 12:02 pm ] |
Post subject: | Re: Do I have an OEM drain plug? |
I would be fairly certain that any Auto parts Zone should have the plug, I went and got new gaskets an oil change ago.... but I don't know if they have a listing, best bet is to take in the plug you have. |
Author: | RJM [ Sat Mar 20, 2010 12:30 pm ] |
Post subject: | Re: Do I have an OEM drain plug? |
I would give you mine but it' busy right now. http://img442.imageshack.us/img442/2161/dsc00093zj.jpg |
Author: | linewarbr [ Sat Mar 20, 2010 4:57 pm ] |
Post subject: | Re: Do I have an OEM drain plug? |
Order a Fumoto valve, and when it gets in, Use the vise-grips and trash the old plug. I love my Fumoto. http://lubricationspecialist.com/front/ ... fileid=105 |
Author: | Crankworm [ Sat Mar 20, 2010 10:17 pm ] |
Post subject: | Re: Do I have an OEM drain plug? |
Thanks for the help everyone, I picked up a new plug at dealership they had it in stock(awesome) and charged me $24 for the plug and a new copper gasket(not awesome) Autozone didn't have a part listed for the crd plug and i couldn't match it to any because that would require removing old one first and its to darn cold to ride the motorcycle if I couldn't find a match right away. |
Author: | mikey1273 [ Sun Mar 21, 2010 4:01 pm ] |
Post subject: | Re: Do I have an OEM drain plug? |
WOW $24 the Fumoto is less than that. Darn stealers! |
Author: | flman [ Mon Mar 22, 2010 7:31 am ] |
Post subject: | Re: Do I have an OEM drain plug? |
Joe Romas wrote: The OEM plug is a 8mm Allen ![]() Really? Both of mine have hex heads on them, not sure of the size? Hmm, wonder if the dealers replaced the Allen plug? |
Author: | Joe Romas [ Mon Mar 22, 2010 8:11 pm ] |
Post subject: | Re: Do I have an OEM drain plug? |
flman wrote: Joe Romas wrote: The OEM plug is a 8mm Allen ![]() Really? Both of mine have hex heads on them, not sure of the size? Hmm, wonder if the dealers replaced the Allen plug? Yep. I got mine new in May 06. Before responding I went to the drawer were that sort of stuff is "stored" and found the allen key that fit. Have you switched to Fomoto valves yet? It's possible that both of yours were stripped and retapped ![]() |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |