http://jeepinbyal.com/jba-front_dana_30.aspx
Click on his survey if you are interested.
Should survive the extra CRD Torque.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Steel front KJ Axle Housing, Cool http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=51178 |
Page 1 of 1 |
| Author: | warp2diesel [ Sat Mar 20, 2010 2:43 pm ] |
| Post subject: | Steel front KJ Axle Housing, Cool |
http://jeepinbyal.com/jba-front_dana_30.aspx Click on his survey if you are interested. Should survive the extra CRD Torque.
|
|
| Author: | CRDMiller [ Sat Mar 20, 2010 3:09 pm ] |
| Post subject: | Re: Steel front KJ Axle Housing, Cool |
Well We don't get to have 3.37 gears apparently (right?) The crd is limited by the cv angle so we cant go taller and clear bigger rubber anyway. (unless we cradle drop, but why not sfa?) I wish our diff was stronger, and after I break the stock diff, i guess this would be a good option (if i could get 3.73's.) I would even consider preemptively changing the housing, but again I want 3.73's. I sit right at 2k rpm in 4'th gear at 65 mph, and fifth is 1704 or so. (accelerate to 68-70 and slow down) I like it a lot. |
|
| Author: | Diggerfreek [ Sat Mar 20, 2010 3:35 pm ] |
| Post subject: | Re: Steel front KJ Axle Housing, Cool |
CRDMiller wrote: Well We don't get to have 3.37 gears apparently (right?) The crd is limited by the cv angle so we cant go taller and clear bigger rubber anyway. (unless we cradle drop, but why not sfa?) I wish our diff was stronger, and after I break the stock diff, i guess this would be a good option (if i could get 3.73's.) I would even consider preemptively changing the housing, but again I want 3.73's. I sit right at 2k rpm in 4'th gear at 65 mph, and fifth is 1704 or so. (accelerate to 68-70 and slow down) I like it a lot. You could always go to 3.21 like my KK has 
|
|
| Author: | linewarbr [ Sat Mar 20, 2010 4:54 pm ] |
| Post subject: | Re: Steel front KJ Axle Housing, Cool |
I think a lot more would be interested than just the CRD crowd. It's not just CRD'ers that break the front axle. |
|
| Author: | Diggerfreek [ Sat Mar 20, 2010 5:47 pm ] |
| Post subject: | Re: Steel front KJ Axle Housing, Cool |
While I'm thinking about it, has any one tried running shaved CV's on a CRD? |
|
| Author: | warp2diesel [ Sat Mar 20, 2010 6:05 pm ] |
| Post subject: | Re: Steel front KJ Axle Housing, Cool |
Posted a link to this thread in the Fabrication section. Don't want to insult the SFA guys and gals. I asked Marlin to have some "Approved Shops" available to do the gut swap for those who have other talents. I don't see why the 3:73 would not fit and work. |
|
| Author: | JL Rockies [ Sat Mar 20, 2010 6:09 pm ] |
| Post subject: | Re: Steel front KJ Axle Housing, Cool |
I have mixed feelings about this; on one hand the idea is awesome and on the other, this company has a history of zero R&D and creates new gens to fix problems that consumers find in the field. Although the chances of death if this fails is far lees than one of those arms. |
|
| Author: | warp2diesel [ Mon Mar 22, 2010 11:00 pm ] |
| Post subject: | Re: Steel front KJ Axle Housing, Cool |
Saw a trial balloon price of $1500 on a bear housing. |
|
| Author: | durangotang [ Mon Mar 22, 2010 11:06 pm ] |
| Post subject: | Re: Steel front KJ Axle Housing, Cool |
warp2diesel wrote: Saw a trial balloon price of $1500 on a bear housing. I won't support housing for bears... |
|
| Author: | JL Rockies [ Mon Mar 22, 2010 11:28 pm ] |
| Post subject: | Re: Steel front KJ Axle Housing, Cool |
Especially all those undocumented bears.... |
|
| Author: | Sir Sam [ Tue Mar 23, 2010 12:04 am ] |
| Post subject: | Re: Steel front KJ Axle Housing, Cool |
Interesting, it looks like a LP D30 from a TJ/ZJ, in which case we can get matching 3.73 gears. Lots of those available, so its just the machine work to get that to fit. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|