The CP3 on the CRD has a gear pump on the rear side to suck the fuel from the tank and the one on the Cummins does not and requires a lift pump
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Where can i find info/part number about CP3 http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=52230 |
Page 1 of 1 |
| Author: | dieselsmoke [ Mon Apr 26, 2010 10:34 pm ] |
| Post subject: | Where can i find info/part number about CP3 |
i cant find any information about the cp3 inj. pump on the CRD. iv tried google and so on. Is is a bosch pump like the cummins? if you have any info please post. I also have an account with Mitchell OD and i still cant find any info other than replacement directions and so on. I know a fair share about the CP3 on a CRD Cummins but not the liberty. thanks guys |
|
| Author: | Sir Sam [ Tue Apr 27, 2010 1:52 am ] |
| Post subject: | Re: Where can i find info/part number about CP3 |
yes, bosch CP3. can't tell you much else about it though. |
|
| Author: | Joe Romas [ Fri Apr 30, 2010 6:54 am ] |
| Post subject: | Re: Where can i find info/part number about CP3 |
The CP3 on the CRD has a gear pump on the rear side to suck the fuel from the tank and the one on the Cummins does not and requires a lift pump
|
|
| Author: | MrMopar64 [ Fri Apr 30, 2010 7:50 am ] |
| Post subject: | Re: Where can i find info/part number about CP3 |
I think the better question, is what information are you looking for? Just because it is a CP3 doesn't really mean anything. There are many different types, designs, flow capacity, pressure rating, internal design, that all fall under the designation CP3. For the most part, the CP3 is being phased out slowly, being replaced by other CP-series pumps that are more flexible and capable than the CP3. |
|
| Author: | dieselsmoke [ Fri Apr 30, 2010 8:11 am ] |
| Post subject: | Re: Where can i find info/part number about CP3 |
hey guys, yes i know there are many cp3's. i was wanting a part number to the CRD cp3. thats it. im not going to debate that its diff. than the cummins. |
|
| Author: | dieselsmoke [ Fri Apr 30, 2010 8:14 am ] |
| Post subject: | Re: Where can i find info/part number about CP3 |
Joe Romas wrote: The CP3 on the CRD has a gear pump on the rear side to suck the fuel from the tank and the one on the Cummins does not and requires a lift pump right, thats why i have a 200gph pump on my cummins. |
|
| Author: | dkenny [ Sat May 01, 2010 6:58 am ] |
| Post subject: | Re: Where can i find info/part number about CP3 |
do you know if there is a number on CP3 itself that you're looking for? would phots help? I one sitting in my garage. -dkenny |
|
| Author: | dieselsmoke [ Sun May 02, 2010 2:08 pm ] |
| Post subject: | Re: Where can i find info/part number about CP3 |
dkenny wrote: do you know if there is a number on CP3 itself that you're looking for? would phots help? I one sitting in my garage. -dkenny Kenny, im around the raleigh area.....you mind if i send you a pm? i would like to look at the pump or something and take some measurements of some stuff....or you could psot some pics. thanks! brent |
|
| Author: | dkenny [ Wed May 05, 2010 9:23 pm ] |
| Post subject: | Re: Where can i find info/part number about CP3 |
not at all.pm away.. I sent you one.. -dkenny |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|