| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Quick fitment question on t-case skid for CRD http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=52725 |
Page 1 of 1 |
| Author: | dgeist [ Fri May 14, 2010 12:22 pm ] |
| Post subject: | Quick fitment question on t-case skid for CRD |
So, does anyone have the "Skid Plate-Transfer Case(2004-2007) [L82209455]" from jparts and can you confirm that it fits the crossmember bolt holes from the 05/06 CRD? I had a heck of a time finding out the tranny skid for other 05-07 models didn't fit withouth mods and that I needed the mopar plate from the earlier gasser with the 45rfe transmission. Long story short, I just want to check before I order the t-case skid from jparts. Thanks. Dan |
|
| Author: | dgeist [ Sat May 15, 2010 2:54 pm ] |
| Post subject: | Re: Quick fitment question on t-case skid for CRD |
Anyone...anyone have a mopar t-case skid that fit without drilling want to give me the part number...? Dan |
|
| Author: | onthehunt [ Sat May 15, 2010 3:36 pm ] |
| Post subject: | Re: Quick fitment question on t-case skid for CRD |
Skid plate numbers: 82209455- skid plate tr $41.65 82207938- skid plate air $67.15 82206122- skid plate fuel $97.75 This is how they are listed on my invoice for all three plates. I'm not sure what one was the transmission plate and what was the transfer case plate. I would think the cheaper one would be the transfer plate as it is about 1/2 the size of the transmission plate. I went out and looked at the plate 52129091AA was stamped in it. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|