I did it myself, pretty strait forward job. Sorry, text is all in Spanish but you get the picture..
http://www.jeepkj.es/cambio-de-embrague ... -t569.html
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Clutch&flywheel replaced on my CRD, got a bunch of pics http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=54954 |
Page 1 of 1 |
| Author: | tonycrd [ Mon Aug 16, 2010 10:26 am ] |
| Post subject: | Clutch&flywheel replaced on my CRD, got a bunch of pics |
I did it myself, pretty strait forward job. Sorry, text is all in Spanish but you get the picture.. http://www.jeepkj.es/cambio-de-embrague ... -t569.html |
|
| Author: | racertracer [ Mon Aug 16, 2010 10:46 am ] |
| Post subject: | Re: Clutch&flywheel replaced on my CRD, got a bunch of pics |
Bravo. Un exccellente lavoro. |
|
| Author: | BlackLibertyCRD [ Mon Aug 16, 2010 12:26 pm ] |
| Post subject: | Re: Clutch&flywheel replaced on my CRD, got a bunch of pics |
Oh yeah! Our rigs here in the states would be much better with a stick.. Show off. 
|
|
| Author: | fastRob [ Mon Aug 16, 2010 9:17 pm ] |
| Post subject: | Re: Clutch&flywheel replaced on my CRD, got a bunch of pics |
Estupendo!!! |
|
| Author: | KJ 119 [ Mon Aug 16, 2010 9:23 pm ] |
| Post subject: | Re: Clutch&flywheel replaced on my CRD, got a bunch of pics |
Great job Tony! Two thumbs up. |
|
| Author: | LibertyCRD [ Mon Aug 16, 2010 10:26 pm ] |
| Post subject: | Re: Clutch&flywheel replaced on my CRD, got a bunch of pics |
I wish I had the 6-speed manual. 
|
|
| Author: | tonycrd [ Tue Aug 17, 2010 6:29 am ] |
| Post subject: | Re: Clutch&flywheel replaced on my CRD, got a bunch of pics |
LibertyCRD wrote: I wish I had the 6-speed manual. My 5 speed works better imo... Swapping a manual in a CRD shouldn't be that hard I think, it's the N3550 which was used in the XJ and the TJ... All you need is another pedal.  Sam has a manual in his CRD project MJ... |
|
| Author: | flman [ Tue Aug 17, 2010 7:47 am ] |
| Post subject: | Re: Clutch&flywheel replaced on my CRD, got a bunch of pics |
Nice job Tony, and a nice shop, must have took more time to snap pics then to do the job, unless you had a photographer? |
|
| Author: | tonycrd [ Tue Aug 17, 2010 11:58 am ] |
| Post subject: | Re: Clutch&flywheel replaced on my CRD, got a bunch of pics |
One of my buddies took like 250 pics while I was doing all the work..  I just added some videos of the flywheel to the tread btw. The shop is a pretty cool place, they rent it out by the hour. They have (basic) tools etc you can use. |
|
| Author: | butcher_block [ Wed Aug 18, 2010 2:26 pm ] |
| Post subject: | Re: Clutch&flywheel replaced on my CRD, got a bunch of pics |
now i need all the part numbers for the flywheel and CRD man. tran. adapter/motor plate 
|
|
| Author: | onthehunt [ Thu Aug 19, 2010 11:37 am ] |
| Post subject: | Re: Clutch&flywheel replaced on my CRD, got a bunch of pics |
Plus a ecm from a manual trans liberty 2.8 |
|
| Author: | tonycrd [ Thu Aug 19, 2010 12:20 pm ] |
| Post subject: | Re: Clutch&flywheel replaced on my CRD, got a bunch of pics |
onthehunt wrote: Plus a ecm from a manual trans liberty 2.8 Nothing GDE cannot fix... 
|
|
| Author: | butcher_block [ Thu Aug 19, 2010 11:56 pm ] |
| Post subject: | Re: Clutch&flywheel replaced on my CRD, got a bunch of pics |
have friends over seas so all i need are the part numbers and have the good shipped (oo and a deep wallet ) i see ecm wiring harness and clutch / flywheeel and the motor to trans plate i think that covers the hard stuff |
|
| Author: | nursecosmo [ Fri Aug 20, 2010 12:24 pm ] |
| Post subject: | Re: Clutch&flywheel replaced on my CRD, got a bunch of pics |
Excelente trabajo Tony. Me encanta su uso de los verbos vosotros. En vista del fallo de su volante bimassa, me pregunto si el volante o "damper" montado al frente de nuestras cigüeñales también estarán fallando a las cien mil millas? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|