I am having trouble with my left (drivers side) brake light. It has gone out twice in the last couple months. The first time, the bulb was melted into the clear inner housing in the tail light assembly. I had to break it out of the inner housing. I put a new bulb in and now two weeks later it is out again. I can keep replacing the bulbs or even get a new housing, but I would like to have an idea of the problem before throwing parts at it. Anyone else experience this? By the way, I have made no alterations to the factory wiring, trailer outlet, lights etc.

Thanks

_________________
2005 CRD 75,000 miles
Various mods, I just fix it till it breaks.
The rest of the fleet:
85 F250 6.9 Diesel 250,000 miles
82 Mercedes 240D 330,000 miles
81 Mercedes 240D 285,000 miles
My kids think gas is only for lawn equipment!

I replaced mine about 6 months ago, same issue. Changed all bulbs to LED. You can thank the bean counters for this P.O.S. system.

_________________
06 CRD Limted Inferno Red, BD 04.06. Goodyear Wrangler Silent Armom 255/70R/16, Pro Vent 200. 02 Air Box Mod., Magnaflow Muffler, DrawTite Front Receiver, Waren 9.5 Portable Winch, Power Connection Front and Rear, Full Mopar Skid Plates.

I had to replace mine both sides when still under warranty for same reason. Newer ones not supposed to be defected and melt. Mine been OK since and was 2 years ago.

_________________
2006 Black Jeep Liberty CRD Limited
K&N, Samco Hoses, Michelin 245/70-16 LTX A/T2, Fumoto F-102, V-Force Muffler, Mopar, Hitch, Trailer Wiring, Skid Plates, Slush Mats, Rear Shelf, Predator Stage 1, Transgo, ORM & CodeReader, Facet 40109 Pump
"IT'S A DIESEL THING, YOU WOULDN'T UNDERSTAND"
Certified Services Auto & Truck Repair