| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| battery connection question http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=56801 |
Page 1 of 1 |
| Author: | changingtime [ Tue Nov 09, 2010 9:10 pm ] |
| Post subject: | battery connection question |
got the new optima red top in today. I had to bend the Negative connection from the cable to fit the battery. anyone else have to do this? took me a few times but now works. the lead really gets eatin up when you pull them off... |
|
| Author: | ATXKJ [ Tue Nov 09, 2010 9:29 pm ] |
| Post subject: | Re: battery connection question |
I put in a yellow top and had to bent the connector a bit the originals weren't stock Optima's - they were specials for Chrysler |
|
| Author: | dgeist [ Thu Nov 11, 2010 12:29 pm ] |
| Post subject: | Re: battery connection question |
Yep. To the inboard side over near the alternator, right? A gentle bend with a wrench was all that was needed. Mopar Optima != stock Optima physically, but the size and CCA rating seems to be the same or close enough for automotive work. Otherwise it fits like a glove. |
|
| Author: | racertracer [ Thu Nov 11, 2010 1:28 pm ] |
| Post subject: | Re: battery connection question |
Sears P4 fit perfectly, the cables slipped right in with no bending. It almost seemed like it was made to fit the CRD. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|