ignored it.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| What did you do to your CRD today? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=57010 |
Page 1 of 34 |
| Author: | flman [ Sat Nov 20, 2010 5:57 pm ] |
| Post subject: | What did you do to your CRD today? |
Today, I changed both engine mounts on the Silver Limited at 42K. That thing rattled with a scraping sound as if the fan was hitting the shroud in reverse, but it wasn't. Turned out to be the left side engine mount, but I changed them both any ways. |
|
| Author: | ATXKJ [ Sat Nov 20, 2010 7:39 pm ] |
| Post subject: | Re: What did you do to your CRD today? |
Well - I didn't do that today - but a couple of weeks ago - and yeah it was the Drivers side making most of the noise - I did the passenger side first and helped a little - but the Drivers side was the one you could shake it and rattle |
|
| Author: | LibertyCRD [ Sat Nov 20, 2010 9:04 pm ] |
| Post subject: | Re: What did you do to your CRD today? |
I took a wash cloth and a bucket of soapy water and hand cleaned all the crevices around the doors and door seals. Boy, does it get nasty in there over time. |
|
| Author: | FormerlyBankNote4x4 [ Sat Nov 20, 2010 10:07 pm ] |
| Post subject: | Re: What did you do to your CRD today? |
I changed the oil- Mobile 1 0w-40 and Napa Gold 5151 filter today. The oil is cheaper at Farm&Fleet then rotella t at walwo. Hey flman could you give me a quick run through on the mounts replacement? I'll move my question to a new thread. |
|
| Author: | NJCRD [ Sat Nov 20, 2010 11:31 pm ] |
| Post subject: | Re: What did you do to your CRD today? |
Drinking a cold one now, changed the oil, Mobil 5w-40 and Mobil M1-301 oil filter, full 7 qts. Washed the little pig and called it a night. Getting some Por15 to do the skid plates next weekend. |
|
| Author: | CRD Joe [ Sat Nov 20, 2010 11:33 pm ] |
| Post subject: | Re: What did you do to your CRD today? |
flman wrote: Today, I changed both engine mounts on the Silver Limited at 42K. That thing rattled with a scraping sound as if the fan was hitting the shroud in reverse, but it wasn't. Turned out to be the left side engine mount, but I changed them both any ways. How much were they, and where did you get them? Thanks. Tom |
|
| Author: | flman [ Sun Nov 21, 2010 9:54 am ] |
| Post subject: | Re: What did you do to your CRD today? |
CRD Joe wrote: flman wrote: Today, I changed both engine mounts on the Silver Limited at 42K. That thing rattled with a scraping sound as if the fan was hitting the shroud in reverse, but it wasn't. Turned out to be the left side engine mount, but I changed them both any ways. How much were they, and where did you get them? Thanks. Tom viewtopic.php?f=5&t=57017&p=634004#p634004 |
|
| Author: | jinstall [ Sun Nov 21, 2010 11:08 am ] |
| Post subject: | Re: What did you do to your CRD today? |
ignored it.
|
|
| Author: | mikey1273 [ Sun Nov 21, 2010 11:23 am ] |
| Post subject: | Re: What did you do to your CRD today? |
nothing yet just looked at it out the window. going to drive it to the gym and car wash |
|
| Author: | audiboy86 [ Sun Nov 21, 2010 2:06 pm ] |
| Post subject: | Re: What did you do to your CRD today? |
Made a set of gutter guard grill inserts and installed my new spidertrax wheels spacers. Now it is time to trim the bumper and liners again this is the third time now since the lift and tires. |
|
| Author: | dkenny [ Sun Nov 21, 2010 7:07 pm ] |
| Post subject: | Re: What did you do to your CRD today? |
nothing...  I found the heat exchanger in my 99 dodge was leaking tranny fluid..a victim of rust.. I did buy new wiper blades for the Jeep. I also still need to change the Diff fluids..why don't they put drain plugs in both axles..its a Jeep/Chrysler thing..my old Toyota had them..solid axles front and rear.. put all this another way..NOTHING WAS WRONG ON THE JEEP..It didn't need work  :):)-dkenny |
|
| Author: | flman [ Mon Nov 22, 2010 12:25 pm ] |
| Post subject: | Re: What did you do to your CRD today? |
Took the Sport in for a NYS Safety inspection. |
|
| Author: | SmokinJoe [ Mon Nov 22, 2010 9:25 pm ] |
| Post subject: | Re: What did you do to your CRD today? |
Changed the rear diff oil and drove it. |
|
| Author: | click23 [ Tue Nov 23, 2010 8:42 am ] |
| Post subject: | Re: What did you do to your CRD today? |
(yesterday) Finished changing the timing belt, water pump and thermostat only to find out that that the hose from the turbo to the air box was rotted out. |
|
| Author: | CATCRD [ Tue Nov 23, 2010 7:02 pm ] |
| Post subject: | Re: What did you do to your CRD today? |
click23 wrote: (yesterday) Finished changing the timing belt, water pump and thermostat only to find out that that the hose from the turbo to the air box was rotted out. Do you run an EHM/Provent? Yours is probably the fifth one on this board to have that tube rot out. Good thing you noticed it. Not a good thing to be sucking dust directly into the turbo and engine. I wonder how many are driving around like that. |
|
| Author: | striperman36 [ Tue Nov 23, 2010 11:13 pm ] |
| Post subject: | Re: What did you do to your CRD today? |
new Hankook 215/85/16s |
|
| Author: | click23 [ Wed Nov 24, 2010 4:11 pm ] |
| Post subject: | Re: What did you do to your CRD today? |
CATCRD wrote: Do you run an EHM/Provent? Nope, but it is on my short list just after a new torque converter
|
|
| Author: | ibedonc [ Wed Nov 24, 2010 4:22 pm ] |
| Post subject: | Re: What did you do to your CRD today? |
well yesterday Keith @ gde put in the new Turbo and trans tune in my 05 today it got 4 new yokohama geolandar a t-s tires the 06 is feeling left out |
|
| Author: | JeepBumm68 [ Wed Nov 24, 2010 10:21 pm ] |
| Post subject: | Re: What did you do to your CRD today? |
I finished up the rear shock mounts, started to dial in the front coilovers, and started making a template for the steering box brace. Started to read up on the SGLI box for the new t-case speedo |
|
| Author: | jmoomaw [ Thu Nov 25, 2010 8:54 am ] |
| Post subject: | Re: What did you do to your CRD today? |
CATCRD wrote: click23 wrote: (yesterday) Finished changing the timing belt, water pump and thermostat only to find out that that the hose from the turbo to the air box was rotted out. Do you run an EHM/Provent? Yours is probably the fifth one on this board to have that tube rot out. Good thing you noticed it. Not a good thing to be sucking dust directly into the turbo and engine. I wonder how many are driving around like that. I assume the airfilter is in the airbox you refer to. Think I will check mine later today.... I installed Samco hoses and a provent filter two years ago....is there another hose I should check? |
|
| Page 1 of 34 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|