craneman wrote:
looking for some info. just picked up a parts truck. bonus, has a tune, green diesel, and a scan tool. question can this be converted over to my running truck. can you move the ecm. or can I pull the tune out with the scan tool and load into my running ecm?
im sure the experts here can advise.
will also have a parts truck to part out if anyone is looking for items.
Mike
The GDE tunes are restricted to only the VIN number they were originally purchased for. GDE tunes cannot be loaded to another vehicle with a different VIN number without going through them which I do not think is possible anymore.
The Free DIY tunes on the LOST DIY Tunes first page can be loaded to any vehicle provided it has the same version number software which is identified using a MPPS cable and the MPPS software.
Go to this page to view the DIY tunes:>
viewtopic.php?f=98&t=78418
_________________
Supporting Vendor and Moderator of LOST05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount98 Dodge Cummins 24 Valve