The MAF is over on the air filter. Look and see if that's what you got
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| New MAP sensor from moparpartsamerica has two bolt holes http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=58095 |
Page 1 of 1 |
| Author: | dansscout350 [ Sun Jan 09, 2011 10:07 am ] |
| Post subject: | New MAP sensor from moparpartsamerica has two bolt holes |
I got my new sensor in and it has two mounting holes, is this correct? The MAP is on the very back top of the engine with a 4mm allen holding it and a 3-wire plug right? |
|
| Author: | bhc04 [ Sun Jan 09, 2011 12:58 pm ] |
| Post subject: | Re: New MAP sensor from moparpartsamerica has two bolt holes |
I don't know which year you have but on my 06 CRD, I just took mine off to clean couple weeks ago and it only has one (1) mounting screw which is 4mm allen head. Does not have 2 mounting screws. Steve 06 CRD AZ. |
|
| Author: | ibedonc [ Sun Jan 09, 2011 1:15 pm ] |
| Post subject: | Re: New MAP sensor from moparpartsamerica has two bolt holes |
dansscout350 wrote: I got my new sensor in and it has two mounting holes, is this correct? The MAP is on the very back top of the engine with a 4mm allen holding it and a 3-wire plug right? sound like you got a wrong part maybe a MAF |
|
| Author: | Squeeto [ Sun Jan 09, 2011 1:19 pm ] |
| Post subject: | Re: New MAP sensor from moparpartsamerica has two bolt holes |
Going to post just the same thing. Check if it looks like the sensor on the air intake box. |
|
| Author: | Sir Sam [ Sun Jan 09, 2011 2:23 pm ] |
| Post subject: | Re: New MAP sensor from moparpartsamerica has two bolt holes |
You may have been another victim of the incorrect parts fiches, the parts fiches, and many of the online ordering sites, will incorrectly list them. This is not the first time this has happened. Care to post a picture of what your talking about? |
|
| Author: | Joe Romas [ Sun Jan 09, 2011 2:30 pm ] |
| Post subject: | Re: New MAP sensor from moparpartsamerica has two bolt holes |
The MAF is over on the air filter. Look and see if that's what you got
|
|
| Author: | flman [ Sun Jan 09, 2011 5:22 pm ] |
| Post subject: | Re: New MAP sensor from moparpartsamerica has two bolt holes |
Use this link in the future to look up the exact part first. http://www.berrysprinter.com/jeepparts.php Compliments of TJKJ with the orange KJ "GASSER"  JK TJ  Actually I have a cast iron engine mount setting on my work bench, it was the wrong part when I ordered a rubber engine mount, but not worth the money to send it back. |
|
| Author: | dansscout350 [ Sun Jan 09, 2011 6:12 pm ] |
| Post subject: | Re: New MAP sensor from moparpartsamerica has two bolt holes |
I know it is not the MAF. I thought maybe it was a new universal style that you would only use one bolt hole. Funny thing is that I put my VIN in with MOPARpartsamerica.com and that is what they sent me. Also the guy at Autozone came up with the same part last night. I will try to get a picture of it up tomorrow. |
|
| Author: | Sir Sam [ Sun Jan 09, 2011 8:18 pm ] |
| Post subject: | Re: New MAP sensor from moparpartsamerica has two bolt holes |
dansscout350 wrote: I know it is not the MAF. I thought maybe it was a new universal style that you would only use one bolt hole. Funny thing is that I put my VIN in with MOPARpartsamerica.com and that is what they sent me. Also the guy at Autozone came up with the same part last night. I will try to get a picture of it up tomorrow. Is the plug the same as your existing one? |
|
| Author: | Sir Sam [ Sun Jan 09, 2011 8:19 pm ] |
| Post subject: | Re: New MAP sensor from moparpartsamerica has two bolt holes |
Also, does it look like this? 
|
|
| Author: | dansscout350 [ Mon Jan 10, 2011 5:39 pm ] |
| Post subject: | Re: New MAP sensor from moparpartsamerica has two bolt holes |
yes it does look like that. What is it? |
|
| Author: | Sir Sam [ Mon Jan 10, 2011 5:42 pm ] |
| Post subject: | Re: New MAP sensor from moparpartsamerica has two bolt holes |
dansscout350 wrote: yes it does look like that. What is it? Thats a sensor for the 2002-2004 KJs, sounds like there was some kind of mixup. What part number does the box have? |
|
| Author: | Sir Sam [ Tue Jan 18, 2011 11:40 pm ] |
| Post subject: | Re: New MAP sensor from moparpartsamerica has two bolt holes |
So was there any resolution to this? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|