| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Wheel Stud Thread Pitch http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=58432 |
Page 1 of 1 |
| Author: | DocB [ Sun Jan 23, 2011 11:42 am ] |
| Post subject: | Wheel Stud Thread Pitch |
Hello Fellas, What is the wheel stud thread pitch on our CRD Liberty? Something isn't right. I'm in a nice warm shop today(11* outside), got 20 new SS lug nuts from Gorilla, and they don't seem to fit. Wanted to get this done today because the nut covers are breaking off from the nuts and I really don't want to get stuck on the road because I can't get a wheel lug nut off. Gorilla says 12MM x 1.50 for our vehicle Summit says 1/2 in. x 20 Owners manual says Jack. Can one of you fellas please let me know ASAP? Much Appreciated. |
|
| Author: | Joe Romas [ Sun Jan 23, 2011 2:44 pm ] |
| Post subject: | Re: Wheel Stud Thread Pitch |
1/2" x20 tpi and the hex size (where the wrench fits) is 3/4" They are called acorn nuts and you can get a 20 piece set for about $20 on e-bay  I bought 3 sets. One for each jeep and another for my camper  No more rusty nuts with the cheap caps falling off 
|
|
| Author: | ptsb5a [ Sun Jan 23, 2011 2:46 pm ] |
| Post subject: | Re: Wheel Stud Thread Pitch |
Are the CRDs any different than the rest of us? If not then 1/2 RH 20. At least that's what the McGard kit I bought was. They fit fine. |
|
| Author: | Joe Romas [ Sun Jan 23, 2011 2:59 pm ] |
| Post subject: | Re: Wheel Stud Thread Pitch |
ptsb5a wrote: Are the CRDs any different than the rest of us? If not then 1/2 RH 20. No Exactly the same as what were on my 89, 96, 99 and now my 2000 XJ's
|
|
| Author: | DocB [ Sun Jan 23, 2011 5:44 pm ] |
| Post subject: | Re: Wheel Stud Thread Pitch |
Thanks fellas. Yes, I guess it is 1/2 x 20. Again, call em up, pack it up, return it, re-order, try again. There's no such thing as a bolt-on! |
|
| Author: | jrsavoie [ Thu Dec 10, 2015 2:01 pm ] |
| Post subject: | Re: Wheel Stud Thread Pitch |
Does anybody have links to the appropriate solid stainless lug nuts for our OEM wheels? |
|
| Author: | JeepMorrison [ Thu Dec 10, 2015 5:09 pm ] |
| Post subject: | Re: Wheel Stud Thread Pitch |
jrsavoie wrote: Does anybody have links to the appropriate solid stainless lug nuts for our OEM wheels? Amazon. Sent from my SM-N900P using Tapatalk |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|