Hey guys,
I found this (stumbleupon) while I was looking for a place to buy the ProVent for my 06 CRD.
Is this style of collection unit a good idea for the CRD?
http://www.angelfire.com/space/neon/catchcan.html

Also I'm getting the JBA 2 1/2" lift w/Al's A Arms.
What else should I consider for the suspension- e.g. type of bumpstops, quick disconnect sway bar, any thoughts are welcome?

Thanks
John

_________________
06 Dk Khaki KJ Limited CRD
Mods:Roof Rack, Offroad Lights, 3" Cat back, Aero Muffler, JBA 2 1/2" Lift, Moabs/BFG Rugged terrain TA's, DIY CCV, GDE Hot Tune, Samcos, Suncoast TC & shift kit.
Coming Soon
JCR Sliders, DIY Bumper Mod, Front & Trans Skid Plates, OBD2 monitor, Mall rated sticker and Camo Jeep Hat

Looks like a TDI guy oil separator with a sight tube. Make your own out of PVC pipe and steel fittings, the plastic ones break and make a mess, been there done that. I used steel wool for the media inside.
Don't be shocked if the Mods move the post to the CRD Love that torque section.

_________________
2006 Pearl Green CRD
Magnaflow 2 1/2" Cat Back
KJ Extra Leg Room Brackets, Carter Lift Pump, V6 Airbox, ORM
Fuel cooler, Oil Separator, Progard 7
Gauges EGT Boost Trans Temp Oil Pres, Michelin LXT AT2 245 70 R16
7,000# Draw Tight hitch, PML EX Deep Trans Pan
Centrifuge, SunCoast, Transgo, RAM TCM, InMotion Stage 2
Wife's 99 TDI VW Beetle

I don't like metal fittings screwed into thin wall plastic. Others have gotten away with it but I prefer this:
viewtopic.php?f=5&t=45359

I may have this linked write-up moved to the tech section. Hopefully the link will still work after that.

I like yours squeeto, nice clean look.

_________________


05 CRD Sport Dark Kahki

RRO: Adventure Rack/Rails ** MOPAR: Skids/Renny Flares & 255/75r17 (32.1) BFG M/T on JK wheels ** ARB: Bumper/IPF lights/790/948/shocks ** GDE: TCM/Hot Tune ** ROCKLIZARD: Super Sliders/Komodo Bumper

My Build Thread
US Army Infantry

Thanks for the good info Squeeto.
I'll post mine when I get it built.

_________________
06 Dk Khaki KJ Limited CRD
Mods:Roof Rack, Offroad Lights, 3" Cat back, Aero Muffler, JBA 2 1/2" Lift, Moabs/BFG Rugged terrain TA's, DIY CCV, GDE Hot Tune, Samcos, Suncoast TC & shift kit.
Coming Soon
JCR Sliders, DIY Bumper Mod, Front & Trans Skid Plates, OBD2 monitor, Mall rated sticker and Camo Jeep Hat

I tried the plastic fittings the first time around and they broke in the cold, made a big mess and I was not happy.
So far my metal ones have held up at -15F and are still going.

_________________
2006 Pearl Green CRD
Magnaflow 2 1/2" Cat Back
KJ Extra Leg Room Brackets, Carter Lift Pump, V6 Airbox, ORM
Fuel cooler, Oil Separator, Progard 7
Gauges EGT Boost Trans Temp Oil Pres, Michelin LXT AT2 245 70 R16
7,000# Draw Tight hitch, PML EX Deep Trans Pan
Centrifuge, SunCoast, Transgo, RAM TCM, InMotion Stage 2
Wife's 99 TDI VW Beetle