| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Need Help-Kenney Lift pump problems! http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=59235 |
Page 1 of 1 |
| Author: | Jeep4ever617 [ Wed Mar 02, 2011 6:24 pm ] |
| Post subject: | Need Help-Kenney Lift pump problems! |
Hello all, Here is my dilemma. I installed the Kennedy lift pump about a month ago and and worked fine for a few weeks but then up and stopped working. Did some digging and found the 10A fuel prime fuse to be blown under the hood. The problem is everytime I replace it it just blows the fuse as soon as I turn the key to on and the pump will not run. Anyone experience this problem? Does the pump call for a larger fuse? Is there a factory relay on the fuel pump wire(blue w/orange tracer)? I double checked all the wiring and the ground connection and it all checked out. I took it to the dealer for a routine timing belt change and had the technician look at it and he was also unable to track down the problem....??? All thoughts much appreciated. thanks. |
|
| Author: | Drewd [ Wed Mar 02, 2011 9:58 pm ] |
| Post subject: | Re: Need Help-Kenney Lift pump problems! |
I've got a kennedy lift pump and never had an issue with stock fuse. I suggest you check your wiring and look for a shorted wire. Good luck. |
|
| Author: | BlackLibertyCRD [ Wed Mar 02, 2011 10:03 pm ] |
| Post subject: | Re: Need Help-Kenney Lift pump problems! |
The pump itself could be shorted. |
|
| Author: | racertracer [ Wed Mar 02, 2011 10:47 pm ] |
| Post subject: | Re: Need Help-Kenney Lift pump problems! |
This is an expensive Kennedy lift pump, that doesn't fail. |
|
| Author: | Joe Romas [ Thu Mar 03, 2011 9:29 pm ] |
| Post subject: | Re: Need Help-Kenney Lift pump problems! |
racertracer wrote: This is an expensive Kennedy lift pump, that doesn't fail. Anything can fail regardless of what it costs To the original poster. Yes there's a relay in the fuse box by the battery
|
|
| Author: | BlackLibertyCRD [ Thu Mar 03, 2011 10:35 pm ] |
| Post subject: | Re: Need Help-Kenney Lift pump problems! |
Disconnect the positive + wire from the pump and install a new fuse. If the fuse don't blow then it's the pump, if it does blow it's the wiring. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|