Nothing at all?????
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Stock CRD Turbo Specs? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=59564 |
Page 1 of 1 |
| Author: | NotPicky [ Sat Mar 19, 2011 12:51 pm ] |
| Post subject: | Stock CRD Turbo Specs? |
Does anyone have the specs on the GT2056v. Wheel sizes cold and hot and what the a/r is open and closed on the turbine side? Wasn't sure if its the same as the GT2056 on Garrett's site Here's the link to Garrett's site: http://www.turbobygarrett.com/turbobyga ... 1578_2.htm |
|
| Author: | NotPicky [ Sun Mar 20, 2011 7:18 pm ] |
| Post subject: | Re: Stock CRD Turbo Specs? |
Nothing at all?????
|
|
| Author: | Joe Romas [ Wed Mar 23, 2011 7:43 am ] |
| Post subject: | Re: Stock CRD Turbo Specs? |
Do a google search for "gt2056v" You'll find CRD turbos are being put on TDI's and it's also possible it's used on the Trouage. WWW.tdiclub.com might get you better results. |
|
| Author: | BostonChemist [ Wed Mar 23, 2011 10:44 am ] |
| Post subject: | Re: Stock CRD Turbo Specs? |
I found that the GTA2056V is also used on some Sprinter vans. The compressor and turbine housings are different, but you can swap them over from the original turbo. Working on finding a solution for the turbo actuator, can't seem to find a stock replacement part#. viewtopic.php?f=5&t=59642 |
|
| Author: | NotPicky [ Wed Mar 23, 2011 11:13 pm ] |
| Post subject: | Re: Stock CRD Turbo Specs? |
Thanks guys. I'm just curious, I'm building a new turbo system for my jeep. Just want to know the stocks specs so I know where to start. I have some idea of what turbos to use. Getting away from the variable vane. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|