LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Can the Camshaft Access Plug really take 59 FT.LBS?????
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=59814		 Page 1 of 1
Author:  painemann [ Wed Mar 30, 2011 7:41 pm ]
Post subject:  Can the Camshaft Access Plug really take 59 FT.LBS?????
I am worried that the spec is wrong... seems a little high. Has anyone used this torque spec on the plugs?
Image
Author:  tonycrd [ Wed Mar 30, 2011 7:50 pm ]
Post subject:  Re: Can the Camshaft Access Plug really take 59 FT.LBS?????
What? 80NM :shock:

That must be wrong. Like the 50NM for the sump drain plug.
Author:  BlackLibertyCRD [ Wed Mar 30, 2011 11:27 pm ]
Post subject:  Re: Can the Camshaft Access Plug really take 59 FT.LBS?????
When you see something that looks like a misprint, use common sense. That must be inch pounds instead and NM was added for it was in the wrong collum.
Author:  painemann [ Thu Mar 31, 2011 3:02 pm ]
Post subject:  Re: Can the Camshaft Access Plug really take 59 FT.LBS?????
BlackLibertyCRD wrote:
When you see something that looks like a misprint, use common sense. That must be inch pounds instead and NM was added for it was in the wrong collum.

Yeah, just wanted to make sure...
Author:  Patrick Henry [ Thu Mar 31, 2011 10:37 pm ]
Post subject:  Re: Can the Camshaft Access Plug really take 59 FT.LBS?????
In the download I have, page 9-245, "Tighten the access plugs to 10.8 NM (95 in-lbs)"
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/