| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| code p0836 http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=59906 |
Page 1 of 1 |
| Author: | nick2,5crd [ Sun Apr 03, 2011 2:21 pm ] |
| Post subject: | code p0836 |
i have the code p0836 for a couple of weeks.when i take of the negative pole for hours i have no code but it returns when i use my 2,5 crd.also,i have changed the transfer case switch a month ago.i know what code means but what i have to do to send this code to hell? 
|
|
| Author: | uham [ Sun Apr 03, 2011 3:03 pm ] |
| Post subject: | Re: code p0836 |
Nick, Looking at the shop manual (8w-31-7) It's either the Powertrain Control Module, Transfer Case Position Sensor or the wiring in between them. Time to get the volt/ohm meter out and check the wiring. Also, check the sensor with the ohm meter to verify it's working correctly. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|