Like the title says has been on for almost 3 weeks now. Just recently notices the odometer doesnt work, my scanner wont do abs codes on the jeep. I noticed the light came on a few times in snow but would always reset with a restart. Anyone have a similar problem? Im thinking maybe rear abs sensor. I want to avoid paying to have it scanned. Thanks in advance.

_________________
05 Patriot Blue CRD, 3in exhaust hooker aerochamber. 2in daystar spacers up front, ome hds out back with 3/4 spacer. 31in revos. Ford explorer rims. Custom made roof rack. Custom tubular front bumper. (FOR SALE) new project 93 xj 204k miles stock for now

Take a look at the string at viewtopic.php?f=5&t=57905&hilit=abs+sensor

_________________
Sold to LOST member my 05 Ltd, GDE Stg II turbo + TCM tune, SunCoast TC w. Transgo kit, Steiger window regulators, Samcos, Fumoto valve, 2nd gen filter head with Lub. Spec. bleeder, Hayden clutch & 11 blade fan, inverted spare, P-1 battery, BF Goodrich Long Trail TAs, Etecno1 glow plugs, timing belt at 50K miles/8 yrs

Thanks for the link. Ill check it out today.

_________________
05 Patriot Blue CRD, 3in exhaust hooker aerochamber. 2in daystar spacers up front, ome hds out back with 3/4 spacer. 31in revos. Ford explorer rims. Custom made roof rack. Custom tubular front bumper. (FOR SALE) new project 93 xj 204k miles stock for now

I'm experiencing the same issue, what is the part number of the rear ABS sensor on a 2005?

_________________
2006 Liberty Limited CRD, Deep Beryl Green, Yeti tune, Arp studs, new cams, rockers, lifters, TB. "Green Monster"
2005 Liberty Sport CRD, Deep Beryl Green, GDE Hot Tune, ARP studs. "Rocket"
1982 Fiat 124 Spider Convertible. "Fiona"

Mine did the same thing twice..first time is was a broken wire connector on the differential speed sensor and second time it was a front anti-lock brake sensor. Both are easy and cheap fixes.

_________________
2005 CRD with 125,000 miles. Replaced with a Wrangler
2002 Dodge Ram 1500 with 332,000 miles. Still runs like new.
Four labs and a mixed breed I rescued. (Three labs, Delta has gone to heaven)
Pro-Drive boat and motor for duck hunting with the labs.

So i checked it out quick and there wereno signs of wearing on any wires. I unplugged and plugged inbthe rear sensor and the connector seemed to be ok. I guess next thing is to take a dvom and check the output of the sensors. Anyone know what they should be?

_________________
05 Patriot Blue CRD, 3in exhaust hooker aerochamber. 2in daystar spacers up front, ome hds out back with 3/4 spacer. 31in revos. Ford explorer rims. Custom made roof rack. Custom tubular front bumper. (FOR SALE) new project 93 xj 204k miles stock for now

Well i figured it out. Aparently when i put the wheel bearing in i put the sensor wire around the wrong side of the knuckle. And it rubbed on the rotor so some weatherproof connectors and electrical tape and a reroute and its good to go. Thanks again for the suggestions.

_________________
05 Patriot Blue CRD, 3in exhaust hooker aerochamber. 2in daystar spacers up front, ome hds out back with 3/4 spacer. 31in revos. Ford explorer rims. Custom made roof rack. Custom tubular front bumper. (FOR SALE) new project 93 xj 204k miles stock for now

I had the same thing it was the plug that plugs into the rear ABS, on top of rear dif. easy fix. but plug was made cheap
wire moves with rear dif after so long it will fail