| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| SEGR circuit pin 5 ??? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=60878 |
Page 1 of 1 |
| Author: | tZac [ Wed May 25, 2011 2:55 pm ] |
| Post subject: | SEGR circuit pin 5 ??? |
On this SEGR circuit I can't see pin NO 5. Is this circuit ok ? https://picasaweb.google.com/Turbo4tim/Ckt#5072768341156720898 Is I am looking into good picture album ? Thank's for info |
|
| Author: | Squeeto [ Wed May 25, 2011 4:26 pm ] |
| Post subject: | Re: SEGR circuit pin 5 ??? |
The circuit is fine. I would suggest substituting a 120 ohm resistor for the 10 ohm though, see: viewtopic.php?f=5&t=39264&p=422362#p422362 Pin 5 reconnects the egr if you want to insert a bypass plug. You may need to pass emission tests by removing the segr and inserting a "back to normal plug". There is a diagram somewhere here. |
|
| Author: | tZac [ Wed May 25, 2011 4:47 pm ] |
| Post subject: | Re: SEGR circuit pin 5 ??? |
Removing this 10 ohms 20W with 120 ohms is excellent info. 120 ohms is standard 1/4W or ? |
|
| Author: | Squeeto [ Wed May 25, 2011 5:08 pm ] |
| Post subject: | Re: SEGR circuit pin 5 ??? |
P = V*V/R P = 13.5*13.5/120 P = 1.5 W Use a 2 Watt resistor. These are still pretty small. |
|
| Author: | tZac [ Sun Jun 12, 2011 4:10 pm ] |
| Post subject: | Re: SEGR circuit pin 5 ??? |
Squeeto wrote: Use a 2 Watt resistor. These are still pretty small. Today I installed SEGR. Excellent mod. Working perfectly with 120 ohms resistor. Minimal heating. Thank's Squeeto ! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|