2006 Liberty CRD engine light on

xarneco · **Joined:** Sun Jul 03, 2011 1:37 pm **Posts:** 3

My dealer ask me $1700 to shut my engine light off !
Replacement parts:
1-EGR valve
2-Map sensor
3-Pressure Regulator

Can I fix it without spending 1.700 ?
Best regards
Xarneco

bhc04 · **Posted:** Sun Jul 03, 2011 3:14 pm

Do you know what "code" it's throwing? Might not be all those things. I don't know "codes" very well but there are experts on this board that might.

ATXKJ · **Posted:** Sun Jul 03, 2011 5:53 pm

Howdy xarneco Welcome to LOST.

it does depend on what code - but findout and send an email to Green Diesel Engineering - they may be able to help (I'll cost less and run better)

try reading the 'Noobie' guide
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=54207

it'll go over cleaning the MAP sensor - might work instead of replacing
and someone might also mention that you get more responses in the 'Love that Torque' main section instead of 'Tech'

xarneco · **Joined:** Sun Jul 03, 2011 1:37 pm **Posts:** 3

My Jeep start's and runs good, when I taking off it makes lots of smock, at cruising speed no more smock at all.
I did clean the Boost sensor and not solved the problem I have to pass the inspection next month.

Thanks for your Help

Xarneco.

2006 Liberty CRD engine light on

Who is online