LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

2006 Liberty CRD engine light on
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=61491
Page 1 of 1

Author:  xarneco [ Sun Jul 03, 2011 2:26 pm ]
Post subject:  2006 Liberty CRD engine light on

My dealer ask me $1700 to shut my engine light off !
Replacement parts:
1-EGR valve
2-Map sensor
3-Pressure Regulator

Can I fix it without spending 1.700 ?
Best regards
Xarneco

Author:  bhc04 [ Sun Jul 03, 2011 3:14 pm ]
Post subject:  Re: 2006 Liberty CRD engine light on

Do you know what "code" it's throwing? Might not be all those things. I don't know "codes" very well but there are experts on this board that might.

Author:  ATXKJ [ Sun Jul 03, 2011 5:53 pm ]
Post subject:  Re: 2006 Liberty CRD engine light on

Howdy xarneco Welcome to LOST.

it does depend on what code - but findout and send an email to Green Diesel Engineering - they may be able to help (I'll cost less and run better)

try reading the 'Noobie' guide
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=54207

it'll go over cleaning the MAP sensor - might work instead of replacing
and someone might also mention that you get more responses in the 'Love that Torque' main section instead of 'Tech'

Author:  xarneco [ Sun Jul 03, 2011 7:16 pm ]
Post subject:  Re: 2006 Liberty CRD engine light on

My Jeep start's and runs good, when I taking off it makes lots of smock, at cruising speed no more smock at all.
I did clean the Boost sensor and not solved the problem I have to pass the inspection next month.

Thanks for your Help

Xarneco.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/