Well there must be a third cluster because my 2007 KJ CRD has a dial with only kilometres on it (no mph at all - as god intended
).You could try an source one from an Australian wrecker like: Poly4x4, Jeep Parts Recyclers, or Mascot Motors.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| does anyone know http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=61589 |
Page 1 of 1 |
| Author: | kelticknight [ Sat Jul 09, 2011 6:35 pm ] |
| Post subject: | does anyone know |
does anyone know where i can get JEEP liberty INSTRUMENT insert too change dials from mph too kph,saw before on ebay.com but dont seem too be able too find know cheers |
|
| Author: | Squeeto [ Sat Jul 09, 2011 8:21 pm ] |
| Post subject: | Re: does anyone know |
Sorry, not from a Canadian wreck. We have large kmh on the outside ring, small mph on the inside ring. |
|
| Author: | papaindigo [ Sun Jul 10, 2011 7:16 am ] |
| Post subject: | Re: does anyone know |
As nearly as I can tell from the 2002 FSM (http://colorado4wheel.com/manuals/Jeep/KJ/) you would have to switch the entire instrument cluster for a new one or one from a wreck. The cluster apparently comes in 2 versions; 1) mph as primary with kph as an inner ring of #s on the speedo in which case the odometer reads miles only or 2) kph as primary with mph as an inner ring of #s on the speedo in which case the odometer reads kph only. I don't know about the 2002 EVIC (heads up display in the ceiling by the rear view mirror) but on the 2005-06 that unit is self programmable for US vs. metric units of measure. |
|
| Author: | kelticknight [ Sun Jul 10, 2011 5:02 pm ] |
| Post subject: | Re: does anyone know |
Squeeto wrote: Sorry, not from a Canadian wreck. We have large kmh on the outside ring, small mph on the inside ring. saw one on ebay but they dont do international have big dial in mph and kph in small,looking for kph in big dial |
|
| Author: | Glend [ Sun Jul 10, 2011 5:23 pm ] |
| Post subject: | Re: does anyone know |
Well there must be a third cluster because my 2007 KJ CRD has a dial with only kilometres on it (no mph at all - as god intended ).You could try an source one from an Australian wrecker like: Poly4x4, Jeep Parts Recyclers, or Mascot Motors. |
|
| Author: | geordi [ Sun Jul 10, 2011 5:34 pm ] |
| Post subject: | Re: does anyone know |
Glend wrote: Well there must be a third cluster because my 2007 KJ CRD has a dial with only kilometres on it (no mph at all - as god intended ).You could try an source one from an Australian wrecker like: Poly4x4, Jeep Parts Recyclers, or Mascot Motors. Oi! And I'll bet you drive on the wrong side of the road too, since you aren't using the Queen's measurements like we in the colonies still are! (at least we know which side of the road to drive on, unlike those crazy Nigels in Blighty) |
|
| Author: | kelticknight [ Mon Jul 11, 2011 9:36 am ] |
| Post subject: | Re: does anyone know |
my setup is in mph,gauges as follows oil,speedo and fuel gauge as ireland like most euro countrys have changed all speed limits too kph from mph,want too change the gauges too,7 months ago,i saw on ebay.com,saw templates for liberty gauges too change to kph,at moment i cant see it on ebay |
|
| Author: | kelticknight [ Mon Jul 11, 2011 11:18 am ] |
| Post subject: | Re: does anyone know |
Glend wrote: Well there must be a third cluster because my 2007 KJ CRD has a dial with only kilometres on it (no mph at all - as god intended ).You could try an source one from an Australian wrecker like: Poly4x4, Jeep Parts Recyclers, or Mascot Motors. do you have any websites for these guys,how long back has kph being there is it on cluster gauges in order from left too right oil-speedo-fuel |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|