| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Recommended (and Qualified) Engine Rebuilders http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=62344 |
Page 1 of 1 |
| Author: | SCOTT'S-05CRD [ Tue Aug 30, 2011 11:50 pm ] |
| Post subject: | Recommended (and Qualified) Engine Rebuilders |
We need a list of good qualified Engine Rebuilders for our CRD Engines. Does anyone here have a good rebuilder that can handle the challenges of our VM Motori Engines? I have an engine that is in need of rebuilding. Figure it's best to get a list going for all to use. |
|
| Author: | warp2diesel [ Wed Aug 31, 2011 5:22 pm ] |
| Post subject: | Re: Recommended (and Qualified) Engine Rebuilders |
Caterpillar, Cummins, Navistar, John Deere, and Detroit all produce some wet sleeve engines. I would bet a Tech who works on one of the above would be better than others when it comes time to rebuild. For other stuff like emissions and fuel systems stuff, Dodge Cummins, Duramax, and Sprinter techs would know what is going on. Can you pull the engine, strip off the Manifolds and other stuff and send it to a rebuild shop, or do you need some place where you can drop off the keys? There are good rebuild shops who can do the inside engine stuff, but don't pull the engine from the vehicle. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|