| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Before installing Frankenlift http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=62428 |
Page 1 of 1 |
| Author: | glaspak845 [ Sun Sep 04, 2011 9:50 pm ] |
| Post subject: | Before installing Frankenlift |
I have a Frankenlift on the way from All J's and thought it would be a good time to replace the bushings with either rubber or urethane but am not really sure without having the lift here to see what all would be affected and which bushings would be accessible for replacement, or if all of them should be replaced. In looking at a few websites I'm not having any success finding bushings listed other than Napa's website where the OEM parts are listed. Two questions: 1) Is replacing the bushings worth it, I assume so, but with what type? 2) Where can I find urethane bushings for purchase? Thanks. |
|
| Author: | tjkj2002 [ Sun Sep 04, 2011 9:53 pm ] |
| Post subject: | Re: Before installing Frankenlift |
No one makes poly bushings for a KJ,your stuck with cheap rubber(anything not OEM) or the better OEM rubber(stamped "made in mexico"). |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|