| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Torque converter identification http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=62721 |
Page 1 of 1 |
| Author: | Ajamant [ Mon Sep 19, 2011 2:30 pm ] |
| Post subject: | Torque converter identification |
I had my recall work done on TC many years ago and have no issues with my TC. I would like to know which converter the stealership installed, but the stealership that installed it is now closed. Called another and they said they could only look back 24 months. How can I figure out which converter is installed. Was the euro version even released then ( installed 2008)??? |
|
| Author: | papaindigo [ Mon Sep 19, 2011 3:32 pm ] |
| Post subject: | Re: Torque converter identification |
I assume you mean the F-37 recall? You may or may not have gotten a new TC depending on the build date of your CRD and how the TC was sounding when the vehicle went in for service. In any case if you got a new TC you did not get the Euro TC, even if you got the F-37 after the Euro became available the dealers were only installing "F-37" TCs under the recall unless you bought a Euro and had them put it in in lieu of the F-37 TC. Additions/corrections welcome. |
|
| Author: | EAB [ Tue Sep 20, 2011 3:27 pm ] |
| Post subject: | Re: Torque converter identification |
Is there any way to ID the pre F37, the F37 or the euro TC? |
|
| Author: | Joe Romas [ Wed Sep 21, 2011 12:52 pm ] |
| Post subject: | Re: Torque converter identification |
EAB wrote: Is there any way to ID the pre F37, the F37 or the euro TC? No, No, and No. But the tc's installed prior to 11/02/05 failed very early in life, like a few thousand miles  Those built after 11/02/05 all got the same TC and it was not really a "F37" TC 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|